Hearth.com Home - The leading source of information on fireplaces, wood stoves, gas stoves, chimneys and pellet stoves

Quick Search
- - For Advanced Search, Click Here ......or, Search entire Hearth.com Site by clicking here - - - - - - - Learn How to Post in the Forums

Test - below searches titles only......

   
1 of 4
1
Covering The Wood
Posted: 04 September 2010 09:58 AM   [ Ignore ]
Pyro Extraordinaire
Avatar
RankRankRankRankRank
Connecticut
Total Posts:  1312
Joined  2010-01-08

The repeat topic of whether or not to cover the wood stacks is not the focal point of this Thread, so if you are tempted to go into THAT debate again, I ask you to kindly stifle the temptation.

This is just a blog about the way “I” chose to do it.  That’s all.

I kept the wood uncovered all summer, ..........and now that the leaves are falling (and we were concerned about Hurricane Earl, which never materialized), I decided to at least put the tarps on the TOP of the stacks.

Here’s a couple of pics of the current situation…....I’ll pull the sides down when winter hits:

-Soupy1957

Image Attachments
Wood Covering 1.jpgWood Covering 2.jpg
 Signature 

-Avalon Rainier 90 Wood Stove (Contemporary, EPA Compliant, Stand-alone wood heat stove)

“Wood will burn in ANYTHING, but useful heating comes from a proper stove, experienced technique, and good wood!!”
                    -Soupy1957

Profile
 
 
Posted: 04 September 2010 10:11 AM   [ Ignore ]   [ # 1 ]
Fire Honor Society
Avatar
RankRankRankRank
ohio
Total Posts:  362
Joined  2009-09-13

was at a garage sale last weekend and scored a piece or rubber roofing material. it cost me $2 and it is about 12’x about 6’. it replaces the ratty pieces of plastic that were on top of one of the stacks . it should last a long time. i use bricks to hold down the top covering mainly because they are here and not used for anything else. have a great weekend, pete

 Signature 

Pete

hearthstone phoenix
buck model 20
stihl saws,fiskars axes
brave ez zplit and good old sledgehammer and wedges

Profile
 
 
Posted: 04 September 2010 10:13 AM   [ Ignore ]   [ # 2 ]
Master of Fire
Avatar
RankRankRankRankRank
Long Island, ny
Total Posts:  855
Joined  2010-01-07

I cover if we are expecting allot of rain or snow.

Image Attachments
IMG_0758.jpg
Profile
 
 
Posted: 04 September 2010 10:15 AM   [ Ignore ]   [ # 3 ]
Fire God
Avatar
RankRankRankRankRankRank
Michigan
Total Posts:  17221
Joined  2007-02-14

Why you would want to put the sides down when winter gets here. That is one of the worst things to do and is totally unnecessary. Are you afraid the snow might hit this side of the piles? Even if rain hits the sides of the piles it will not harm anything. It dries in a matter of hours.

 Signature 

Keep smiling!
Dennis grin

Over 50 years heating with wood
Woodstock Fireview
Stihl Farm Boss 290
20 ton Splitter
Ornery wife

Profile
 
 
Posted: 04 September 2010 10:17 AM   [ Ignore ]   [ # 4 ]
Fire God
Avatar
RankRankRankRankRankRank
Michigan
Total Posts:  17221
Joined  2007-02-14

After I posted the above, I thought about the recent rain we had. In 2 days we received 1.3” of rain. I recall passing a couple of our wood piles and seeing they were wet. The reason I noticed is that I intend to take some of this wood along on our trip. I figured I’d wait until the ends of the wood was dry. Two hours later I passed the wood piles and everything was very dry. No, it doesn’t take long.

 Signature 

Keep smiling!
Dennis grin

Over 50 years heating with wood
Woodstock Fireview
Stihl Farm Boss 290
20 ton Splitter
Ornery wife

Profile
 
 
Posted: 04 September 2010 10:57 AM   [ Ignore ]   [ # 5 ]
Fire Honor Society
RankRankRankRank
N.H.
Total Posts:  196
Joined  2010-08-17
Backwoods Savage - 04 September 2010 10:15 AM

Why you would want to put the sides down when winter gets here. That is one of the worst things to do and is totally unnecessary. Are you afraid the snow might hit this side of the piles? Even if rain hits the sides of the piles it will not harm anything. It dries in a matter of hours.

Right on target !


The repeat topic of whether or not to cover the wood stacks is not the focal point of this Thread, so if you are tempted to go into THAT debate again, I ask you to kindly stifle the temptation.
This is just a blog about the way “I” chose to do it.  That’s all.
I kept the wood uncovered all summer, ..........and now that the leaves are falling (and we were concerned about Hurricane Earl, which never materialized), I decided to at least put the tarps on the TOP of the stacks.

Can’t resist the temptation. Unable to stifle. LOL

The practices based on the theories of seasoning are many. Except for using tarps over stacks, they all work OK. Excuse the unstifled tempation.

Practice #1:
Do as little as you can. Leave the splits in a rough pile where you split. No stacks. Leave uncovered ALL the time. Use pallets, crushed stone, concrete base. Sweep snow off when needed. Works well for some.
Easy, but….............Please, no Holz whatever.
Some where, some have said that the rain displaces the more viscous sap. Possible. Who knows.

Practice #2:
Nice, neat, easy on the eyes stacks covered by solid material ( ply scraps, metal/fibreglass/asphalt roofing ) . Never those disposable, 1 year cheap blue/green/black tarps ( UV )on top or over the sides to trap mold, critters, water, snakes. They disintegrate, blow, are ugly.
Those piles do give you the chance to stand back and admire your handiwork again, and again, and ....

Practice #3:
Build it. If you use wood for heating, build a wood shed or two. Google for simple, quick, inexpensive plans.

Tempation gone.

Profile
 
 
Posted: 04 September 2010 11:26 AM   [ Ignore ]   [ # 6 ]
Inferno
Avatar
RankRankRankRankRankRank
Just Outside the Blue Line
Total Posts:  3709
Joined  2009-11-26
fjord - 04 September 2010 10:57 AM

Some where, some have said that the rain displaces the more viscous sap. Possible. Who knows.

Rain won’t, but total submersion in water for a very long time could do that if the tree is freshly felled and bucked.  But who’d want to?  There’s BTUs in that sap once it’s dried out.  The idea is to get the water out, not the sugars.

I do nothing except to stack it with a much air movement as I can get on it.  Cover it?  Never have, never will.  But I won’t make a recommendation to follow my way or get into a debate about it so as to honor the request in the OP. wink

 Signature 

Harman P-61A
VC “1977” Vigilant (gone but not forgotten)
Woodstock Wannabe

Profile
 
 
Posted: 04 September 2010 01:34 PM   [ Ignore ]   [ # 7 ]
Pyro Extraordinaire
Avatar
RankRankRankRankRank
Springfield Ma (western mass)
Total Posts:  2351
Joined  2006-11-18

I cover mine now in the fall. So that when it snows I can scrape it off as my wood sits on a platform.. so with 7 green cords I don’t wanna take a chance of it breaking/collapsing….. also when the leaves come down don’t want them in the stacks
My winter stash comes up to the house I tarp it but try to leave a side open .... I hate when ice gets on the wood

 Signature 

P.E. Summit insert! (wood)
Harman Accentra (pellets)
Napoleon gas insert (nat gas)
Electric radiant heat (elecrtic)
Oil hydronic forced hot air system (oil)
Huskee 28 ton splitter
Bring on the New England Winters!!

Profile
 
 
Posted: 04 September 2010 02:42 PM   [ Ignore ]   [ # 8 ]
Master of Fire
Avatar
RankRankRankRankRank
Long Island, ny
Total Posts:  855
Joined  2010-01-07

I think I’ll do it the way I’ve been.  It seems to work for me.  For the few times I cover it ther are no problems.

Profile
 
 
Posted: 04 September 2010 02:56 PM   [ Ignore ]   [ # 9 ]
Moderator
Avatar
RankRankRankRankRankRank
Bend, Oregon
Total Posts:  7331
Joined  2007-09-30

I season my wood out in the open, uncovered.  After a couple of years of that, it’s ready to go into the shed for the upcoming burning season.  Fetching wood from a stack under a snow & ice covered tarp got really really old for me.  Here’s a pic of my “tarp”.  Rick

Image Attachments
tarp.jpg
 Signature 

Lopi Liberty w/blower in the house, Century Hearth FW240007 in the workshop
2 1/2 acres of Juniper, Sagebrush, and Basalt…nice view, though
Bunch of other junk

“Discussion is an exchange of knowledge; an argument an exchange of ignorance.” - Robert Quillen

Profile
 
 
Posted: 04 September 2010 03:48 PM   [ Ignore ]   [ # 10 ]
Pyro Extraordinaire
RankRankRankRankRank
Middle TN
Total Posts:  2352
Joined  2008-11-01
fossil - 04 September 2010 02:56 PM

I season my wood out in the open, uncovered.  After a couple of years of that, it’s ready to go into the shed for the upcoming burning season.  Fetching wood from a stack under a snow & ice covered tarp got really really old for me.  Here’s a pic of my “tarp”.  Rick

Like Jeremiah Johnson said after building his 2,500 sq. ft. cabin BY HAND, “It’ll have to do.”    LOL

Love your “tarp,” Rick.

 Signature 

‘08 Lopi Endeavor

Profile
 
 
Posted: 04 September 2010 03:56 PM   [ Ignore ]   [ # 11 ]
Inferno
Avatar
RankRankRankRankRankRank
North West Iowa
Total Posts:  4363
Joined  2010-02-15

I cover mine in late fall, (yep sides down) to keep it from getting burried in snow,  no problems and been doing it this way for a long time.

 Signature 

PE Summit (red one)

Profile
 
 
Posted: 04 September 2010 04:22 PM   [ Ignore ]   [ # 12 ]
Pyro Extraordinaire
Avatar
RankRankRankRankRank
Springfield Ma (western mass)
Total Posts:  2351
Joined  2006-11-18
wood spliter - 04 September 2010 02:42 PM

I think I’ll do it the way I’ve been.  It seems to work for me.  For the few times I cover it ther are no problems.

 

Me too!

 Signature 

P.E. Summit insert! (wood)
Harman Accentra (pellets)
Napoleon gas insert (nat gas)
Electric radiant heat (elecrtic)
Oil hydronic forced hot air system (oil)
Huskee 28 ton splitter
Bring on the New England Winters!!

Profile
 
 
Posted: 04 September 2010 05:46 PM   [ Ignore ]   [ # 13 ]
Fire God
Avatar
RankRankRankRankRankRank
NW Ontario
Total Posts:  7099
Joined  2008-11-09
fossil - 04 September 2010 02:56 PM

I season my wood out in the open, uncovered.  After a couple of years of that, it’s ready to go into the shed for the upcoming burning season.  Fetching wood from a stack under a snow & ice covered tarp got really really old for me.  Here’s a pic of my “tarp”.  Rick

Ja, me too except I only cover the top, not the sides.  Never been much of a problem.
100_0360.JPG

 Signature 

- I don’t suffer from insanity. I enjoy every minute of it!
RSF Onyx fireplace - HM wife - MTD 20 ton splitter - Partner R420 saw - 12 cord woodshed - Craftsman YT3000 to haul wood and splitter - GSD bitch to guard it all

Profile
 
 
Posted: 04 September 2010 06:48 PM   [ Ignore ]   [ # 14 ]
Fire Honor Society
Avatar
RankRankRankRank
Bedford, NH
Total Posts:  455
Joined  2009-08-11
soupy1957 - 04 September 2010 09:58 AM

The repeat topic of whether or not to cover the wood stacks is not the focal point of this Thread, so if you are tempted to go into THAT debate again, I ask you to kindly stifle the temptation.

This is just a blog about the way “I” chose to do it.  That’s all.

I kept the wood uncovered all summer, ..........and now that the leaves are falling (and we were concerned about Hurricane Earl, which never materialized), I decided to at least put the tarps on the TOP of the stacks.

Here’s a couple of pics of the current situation…....I’ll pull the sides down when winter hits:

-Soupy1957

that works nicely…
I bury mine…

 Signature 

Elm CleanAir 24”
Energy Harvester MC
http://www.christianaftercare.com
‘97 F-250 HD 4x4 5.8L
‘87 Ranger 4x4
STIHL 361 25” & 18”
Back-up saw: Craftsman 18”
Pruner: Fiskars 15’

Profile
 
 
Posted: 04 September 2010 07:13 PM   [ Ignore ]   [ # 15 ]
Moderator
Avatar
RankRankRankRankRankRank
Bend, Oregon
Total Posts:  7331
Joined  2007-09-30
LLigetfa - 04 September 2010 05:46 PM

...Ja, me too except I only cover the top, not the sides.  Never been much of a problem.

Yeah, mine’s not as tight as the ¾ shot pic makes it look.  The sides and the floor all have generous spacing for airflow.  Everything that goes in there is ready to burn, anyway…plus we live in a region of nice low humidity.  Rick

Image Attachments
shedvent.jpg
 Signature 

Lopi Liberty w/blower in the house, Century Hearth FW240007 in the workshop
2 1/2 acres of Juniper, Sagebrush, and Basalt…nice view, though
Bunch of other junk

“Discussion is an exchange of knowledge; an argument an exchange of ignorance.” - Robert Quillen

Profile
 
 
Posted: 05 September 2010 05:53 AM   [ Ignore ]   [ # 16 ]
Inferno
Avatar
RankRankRankRankRankRank
CNY
Total Posts:  3652
Joined  2008-01-25

Soupy I think that’s one of the neatest applications to cover the rows that I’ve ever seen….esp the overhang. Nice work.

 Signature 

“How do you like them apples?”  Captain Janks

QF 4300ST

Profile
 
 
Posted: 05 September 2010 07:09 AM   [ Ignore ]   [ # 17 ]
Fire Honor Society
RankRankRankRank
Total Posts:  450
Joined  2008-10-08

Im not covering mine. If they call for snow I’ll just load up the front porch with a few weeks worth of splits. I’ve ready too many post about people bitching about tarps blowing away and ripping apart lol.

Profile
 
 
Posted: 06 September 2010 06:52 PM   [ Ignore ]   [ # 18 ]
Master of Fire
Avatar
RankRankRankRankRank
PITTSBURGH
Total Posts:  927
Joined  2010-04-30

I keep my stacks uncovered, I think they look better and I do not have to hassle with snow and ice on the tarps.  I then move some in the basement and some to a wood rack I built with a roof over it that is close to the house.  It is nice to know when it gets cold and snowy I have about a month’s worth of wood close and dry and no hassle with the stacks.  I am thinking about moving some under my deck after I put a corrugated roof over the piles.  But the tarps I found to get tough to deal with when the ice comes.

 Signature 

Stihl 660, Stihl 390, Husqvarna 50, Alaskan Mill III
Yamaha Kodiak
23 acres of hardwood
Bobcat T190
Jotul Rockland 550
Monster Maul and Fiskars SS

Profile
 
 
 
1 of 4
1