yardworks 6.5 ton electric splitter

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

salmonhunter

Burning Hunk
Apr 16, 2012
104
newbrunswick canada
I was looking in the canadian tire flyer and noticed there 6.5 ton splitter was on sale this week for $449 so I decided to go get one and try it out. I split all the nasty chunks I had and only had to play around with 1 big 18 inch round, which busted after I rotated it. It even seemed to bust through the crotch pieces pretty easily . Its got 2 settings on the lever one for soft wood(which I used mostly) and one for hard wood which is pretty nice. First setting moves the ram pretty fast but with less power. Second setting is a little slower but seemed to bust through anything I threw at it I even tried to find the hard spots on some of the rounds. I gotta say it is well worth the $500 or so it payed. If any of you guys are looking for a cheap splitter and have access to one of these splitters I highly recommend it. However if your regularly splitting rounds bigger the 16 inches diameter maybee this wont be the splitter for you as I did have a couple big 18 inch maple that I had to maneuver a couple times to bust though them. However 90% of my rounds are 16inches or smaller so im happy and so is my back.
 
  • Like
Reactions: bogydave
Sounds like a good deal, do you have any pics of the splitter or a link?
 
I like the comment ; " i'm happy and so is my back."

That tells the best part of the review story. ;)
 
Interesting! It looks just like my Pow'R'kraft 7-ton splitter, except that yours is painted green, has a handle between the front legs, and looks as though it has more robust wheels. I paid around $559 with free shipping, but of course I paid US dollars and I assume yours is priced in $CAN.
ASI%20-65575%207%20ton%202%20speed.jpg
 
yea looks exactly the same with a few minor differences so how do you like your little splitter? Im making a little bench for it today so it will be at waist height.
 
yea looks exactly the same with a few minor differences so how do you like your little splitter? Im making a little bench for it today so it will be at waist height.

Rod can you post a picture of your bench, I plan on doing that for mine and Ive been searching for some ideas. The stand looks like it might help too but I saw someone built a bench for theirs that has an area where you could put the unsplit section of your round instead of bending down to pick it up all the time.
 
I've really enjoyed mine...nothing it hasn't split, if given a second or third try on large or gnarly pieces. Largest have been 18" diameter red oak and 16" diameter locust and elm.
 
il post a pic when my wife gets home no idea where the camera is. But in the meantime check out this youtube video i copied his idea

it only costed me $25 for the plywood as I had some old 2x4's and screws from an old renovation
I also didnt bother with the long crossbeam on the bottom. I tried to lift the splitter on to the table by myself but its too heavy gonna have to wait for a friend to come give me a hand. Im gonna bolt it right on to the bench and add some wheels to the bottom of the table so I dont have to lift it up there every time I wanna use it
 
Status
Not open for further replies.