Anyone use a hand truck?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Is there something wrong with the site? I try to highlight a select phrase and instead I get the whole rest of the thread highlighted along with a little "quote me" bubble.

New site feature, kicks some serious a$$ for those of us that frequently quote multiple posts or like to interject comments. ==c
 
I've used one a few times in backyard here or a few other places where its flat,works great same as contractors wheelbarrow does.But they wouldnt be helpful on the bumpy & steep slopes that 90%+ of my wood is cut from.
 
Master Mech. That's great for those of you. But is there any way to simply quote a small sentence or paragraph. I find this feature absolutely awful.
 
I think this handtruck thing is a pretty good idea! I have a hand truck in the barn and just might give it a try. Thanks!!
 
Master Mech. That's great for those of you. But is there any way to simply quote a small sentence or paragraph. I find this feature absolutely awful.
Simply highlight only the part you want to quote and slap the "Quote Me" button. The whole point of the feature is to make it much faster/easier to quote only the parts of a post you want to respond to.
 
I need a good way to lift felled trees so I can buck them without pinching the saw. I see the LogRite Jr. Arch and that seems like it would work because it would serve the purpose of a timberjack and it would help haul them out.

I don't have the coin for a LogRite though.

I'm wondering if anyone puts a hand truck to similar use? Milwaukee makes some that can handle 800 pounds and they have inflatable tires. The truck could be slipped under the trunk and used as a lever to lift up an end. Then when they're cut up it seems like the truck could serve as an improvised skidding aid.

It's not the ideal, but I'm just curious if anyone has tried using one and how well it might work.


For lifting heavy logs just high enough to get something under for cutting, I have found that a simple garden pick (flat side on one end, pointy end on the other) has amazing leverage.

Greg
 
  • Like
Reactions: albert1029
I use a P-handle dolly to move large rounds but not to elevate for bucking. With the dolly laid down, the handle ends up lower than the business end and the log might want to roll downward. When I bring a large round to the splitter, I have to set the P-handle onto something to elevate it so the round won't roll down hill. I thought of bolting a hook to the splitter to hang the P-handle onto. It would also work to tow the dolly behind the splitter when I tow the splitter behind my tractor.

When bucking on the ground, I just put pressure on the round with my left foot and can tell when there is just the bark left holding. I never ground the chain doing that. Sometimes I cut most of the way through and roll the log to finish the cuts particularly on uneven ground that may pinch the bar.

Some folk seem to like the TimberJack which is a cant hook with a foot attached. Others think it's useless. A cant hook is on my wish list but not the TimberJack.
 
Status
Not open for further replies.