Dealing with sulfur water

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

sunglider

Member
Dec 22, 2009
38
Andes, New York
Also high iron content. The sulfur smell is pretty obnoxious now that its cold and windows are closed. I've researched various methods of dealing with this - chlorine, sodium and greensand systems among others - but the one that makes the most sense to me is hydrogen peroxide. Seems effective with the least chemical effect on the environment.

Every water treatment business like Culligan tries to sell their own preferred system so its hard to get unbiased information.

Has anyone here successfully dealt with sulfur in particular? How?

Thanks
 
Two things.

One, if you have the sulfur smell in the house, you will have corrosion on critical systems. It will eat air conditioners and heat pumps, plumbing components that sweat, and anything else metal that doesn't have a bone dry surface. The odor is usually hydrogen sulfide gas, which dissolves in contact with moisture and forms a weak sulphuric acid. It cost me an air conditioner when I lived in Florida. It pinholes them. So you have to get rid of the odor or pay the price.

Two, also in Florida, the most effective way to get rid of the odor is by aeration. The aerator tanks usually sit outside. That probably isn't an option in your area, though.

I don't know if this info will be helpful to you, but hopefully at least some of it will be useful.
 
This may apply here...since you mentioned iron, there is an iron loving bacteria that creates SO2 (sulfur dioxide..it smells) especially in a hot water heater.
The iron is dissolved in the water from the well. It precipitates into a solid when exposed to enough oxygen. Thus, as White Pine said, the aeration device can solidify the Fe and then the greensand filter can remove it.
Is it worse on the hot water? Mine is.
 
I've been getting some hydrogen sulfide smell along with our normal iron staining. I don't know if it's hydrogen sulfide or sulfur dioxide but it is not any worse in the hot water.

Step one is to test the water to determine how much of each bad thing you have to deal with. Then determine the technology.

I was under the impression that greensand is more than a filter, the greensand will cause the solid to form as well as filter it so you would eliminate the aerator. Ideally we could chlorinate but that's tough to do in a residential system.
 
This may apply here...since you mentioned iron, there is an iron loving bacteria that creates SO2 (sulfur dioxide..it smells) especially in a hot water heater.
The iron is dissolved in the water from the well. It precipitates into a solid when exposed to enough oxygen. Thus, as White Pine said, the aeration device can solidify the Fe and then the greensand filter can remove it.
Is it worse on the hot water? Mine is.

This is exactly the issue I had when I purchased a home on well/septic several years back. What has worked 99% for me is a charcoal whole house filter. I went with a very affordable GE filter unit you can buy at most big box stores. I replace the $30 filter every six months and I rarely have the smell anymore. These days we'll only get the smell if we leave the house for several days with zero water movement in the hot water tank...

This is the system I have:

http://www.homedepot.com/buy/ge-1-in-high-flow-opaq-wh-system-gxwh35f.html

This is the filter I use:

http://www.amazon.com/GE-FXHTC-SmartWater-Replacement-Cartridge/dp/B0025YUF68
 
I was under the impression that greensand is more than a filter, the greensand will cause the solid to form as well as filter it so you would eliminate the aerator. Ideally we could chlorinate but that's tough to do in a residential system.

Highbeam, you may be right about the greensand, I'd have to read up on that. And, our neighbor does run a chlorinator with good results. I prefer to avoid if possible, and our water is not as bad as the OP sounds like.
(For the benefit of other readers): The chlorine also precipitates the iron. My neighbor tested this by filling the kid's wading pool and then adding pool chlorine. The next day the bottom was a layer of rust. Of course, the chlorine also kills bacteria too.
 
This is exactly the issue I had when I purchased a home on well/septic several years back. What has worked 99% for me is a charcoal whole house filter. I went with a very affordable GE filter unit you can buy at most big box stores. I replace the $30 filter every six months and I rarely have the smell anymore. These days we'll only get the smell if we leave the house for several days with zero water movement in the hot water tank...

This is the system I have:

http://www.homedepot.com/buy/ge-1-in-high-flow-opaq-wh-system-gxwh35f.html

This is the filter I use:

http://www.amazon.com/GE-FXHTC-SmartWater-Replacement-Cartridge/dp/B0025YUF68

This is good info. Where did you place the filter? After the softener?
 
The home depot style filter head is just the head. You then buy whatever filter you want. This is a standard filter size and you can buy sediment filters in various posre sizes, and also the carbon filter. I would expect the carbon filter to be the very last filter before going to the taps.
 
You may need to change something in your water heater - called the anode. Check out this link. We changed ours and it improved things by 95%. When the smell comes bac, we will do an anode change again. Some water heaters do not come with changeable anodes, and have permanent ones. Once corroded, you can not change them out. You may have to buy a new water heater that allows you to change out the anode (called a sacrificial anode)
http://www.annarbor.com/home-garden/sulfur-smell-in-my-water/
 
My cold water is just as bad as the hot so I know its not just a problem with the hot water heater. I will have to have the water tested and then get recommendations from all the local water treatment companies.

As I understand it, the greensand system is highly poisonous. Chlorine is no picnic either.
 
My cold water is just as bad as the hot so I know its not just a problem with the hot water heater. I will have to have the water tested and then get recommendations from all the local water treatment companies.

As I understand it, the greensand system is highly poisonous. Chlorine is no picnic either.
It seems that aeration then filtration may be a good solution then.
 
This is good info. Where did you place the filter? After the softener?

I installed mine before my water softener assuming I could potentially extend the life of the softener by keeping some of the junk out.
 
It seems that aeration then filtration may be a good solution then.

Problem is that you need to break head to aerate and then repressurize. Lot's of wasted energy and hassle.
 
Problem is that you need to break head to aerate and then repressurize. Lot's of wasted energy and hassle.
Agreed. If the OP had a hill to put the aeration tank on he might be able to negate the losses somewhat but getting power for the blower there might be a problem.
 
Problem is that you need to break head to aerate and then repressurize. Lot's of wasted energy and hassle.
I'm not 100% sure, but I believe there are systems that keep the pressure on with air injection. This one looks like just another tank in the basement:
http://www.purewaterproducts.com/aermax.htm
Looks like a pretty good site to read anyway regarding these problems.
 
When was the last time you chlorinated your well?
 
Yes, I was reading for hours at the link that Greg H posted and some aerators, though expensive, do aerate under pressure.

Great site BTW.
 
Yes, I was reading for hours at the link that Greg H posted and some aerators, though expensive, do aerate under pressure.

Great site BTW.
It seems like the energy requirements might be similar though since you'd have to compress air for injection?
 
I had great success doing a thorough chlorination. my second thought if it comes back is to drop a line into the well and aerate the water in the well.
 
I dump chlorine in my well. Put my carbon filter and softener on by pass, flush the lines with chlorinated water back into the well, let it sit for 8 hours, flush the lines again, put filters in regular mode and that does it for afew months. This summer with the low water table I did it twice and not since..I have a chlorination system but the holding tank leaks so I bypass that for now...till I replace the whole system.......
 
I had a sulfur smell in a home years ago. I traced it to the charcoal filter :eek: Yep, it was actually the depleted charcoal filters that were causing the odor, smelled just like sulfur. I removed the charcoal filter and housing and the odor disappeared.....go figure.
 
Do you have any water treatment system installed now? We assume that you have well water, is that correct? If well water, then get it tested by an independent lab, not a store trying to sell you a treatment system (although some stores will do a free analysis without committing you to buying their system). Take that sample as close to your well as possible, before any treatment system. You need to know if the smell is coming from the well, or being formed in your piping, you may be able to figure this out yourself by smelling samples from different places in your water system (start at the location closest to your well). Are you completely sure the smell is also in the cold water (residual smell may be coming from the mixer faucet) , is it also present in outdoor cold water faucets?
Filtering to remove the smell may be necessary, but treating the cause will be better in the long run if possible.

TE
 
Status
Not open for further replies.