MS460 Magnum for $450.00......Should I?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Heck Boog, I have one I would have traded....it's the little 27 though aka, the hand cannon hahahaha
27s are great. I shot IDPA with one. I never got good at it. I was always in the top quarter for accuracy but bottom quarter for speed. I just traded a Gen I G22 for a Gen III G19 with Crimson Trace grips. Sweet!
 
  • Like
Reactions: Boog
Be careful talking about guns, ammo and chainsaws with Boog. Next thing you know, he will have all your saws, and you will have a pile of ammo. The problem with a pile of ammo is that it is like a pile of firewood. Not saying that is a bad thing, but you can burn though it pretty fast.

Damm straight shooting there StillHead, that's exactly what will happen! Like the guy who was talking about this "440" (that later turned out to be a 460). He got a very small pile of ammo, I got his saw. This is what it looks like today:

460.3.jpg

460.2.jpg


I only wish I had taken a before photo, it was a real beater cosmetically and had a big crack in the handle............ this Stihl gray-white paint is real nice. I've only put one coat on the upper surfaces. Picked up a new tank/handle for $88 on ebay, and used top & air covers cheap there too, plus a new 460 ID tag. The piston and cylinder looked fantastic on this saw and it ran (and vibrated) real nice. It was worth it to me to fix it up. I'll have just under $375 into it when I'm done. It will look better than Dex's saw! :p

So StihlHead, what are you packing these days............ getting a little short on any calibers?
 
  • Like
Reactions: smokinj
......if I do, I'll have to sell one from the stable. Probably will be the Husqvarna 372XP. Not that I don't like that saw, but if I get that 460 I really don't know that I'll need it.

The 460 looks pretty decent (it is used, but in good condition), compression is around 150lbs, it needs the throttle lock repaired which is an easy fix.....oh and it'll get a muffler mod too...

Might be able to tweak the price a little bit, but I think that would be a fair price as is.....

Thoughts? Discuss........

Here ya' go ;-)

STIHL 088 MAGNUM CHAINSAW in Damascus, MD
 
So StihlHead, what are you packing these days............ getting a little short on any calibers?

Guns and chainsaws... now we are into the real interesting stuff!

I am long on .45 ACP and .223 ammo... but if you have some British .303 I could use some for my Enfield. I do not fire it that much though. It has a kick that is hard on my shoulder. I also need a smaller caliber semi-automatic to carry, as the 1911 is a bit large to lug around concealed. I like it for open carry on my thigh though. I want a single action 9mm or 10mm. Now that Obammy is flapping about gun control it is hard to even get into the door at the local gun shops. I will have to hit the next gun show in town.
 

Yep, that is right down the road from me, but I need a 088 like I need another hole in my head. For that matter, I am looking at buying a MS362, and I need that like I need another hole in my head. Going to get a MS192c-e though here real soon. That one I can semi justify.
 
No no no no no no no no no... you simply NEED more chainsaws!

Yes, my precious chainsaws... good they are for us!

I would say that you have a hole in your collection at the low end, the 192 or a 211 type saw would fill that void. Then you have the rather large and glaring hole in the mid range between the 261 and the 660. You simply need a 60 or 70 cc saw, or both! Yes yes yes, a 30-40cc lower end saw, and a 60cc and 70cc saw is the Rx here. Then you will have the holes filled, see? :cool:
 
  • Like
Reactions: DexterDay
No no no no no no no no no... you simply NEED more chainsaws!

Yes, my precious chainsaws... good they are for us!

I would say that you have a hole in your collection at the low end, the 192 or a 211 type saw would fill that void. Then you have the rather large and glaring hole in the mid range between the 261 and the 660. You simply need a 60 or 70 cc saw, or both! Yes yes yes, a 30-40cc lower end saw, and a 60cc and 70cc saw is the Rx here. Then you will have the holes filled, see? :cool:

Yeah, I am sure I will have plenty of saws over time. Seems to be a habit of mine, collecting things. Saws, pens, bicycles, guns, star wars lego sets. Think that is all of the "collections" right now. Ah, forgot the old comic book collection and hand carved decoy collection. God help me when I start collecting cars.
 
My dad collected cars. He even composted them. Literally. When he died, we found 2 buried Caddys in the back 40 that his second wife did not even know about. He had over 20 cars and PUs, and 2 boats. My neighbor here collects old PU trucks. They are completely overgrown with blackberries. I counted over 100 when I walked back there last summer. Even he does not recall how many he has any more.

I had over 20 saws in my collection when I moved here 2 years ago. Then I sold over half of them. More from fear of theft or robbery and I did not have room for them all. Most of them were in boxes. The economy is thawing out and people are not unloading saws like they were 4 years ago. I have not bought any new or used saws in a while. I could get by with just one 026 and a 361. Or even just one 361. My precious! But 2 are more better.
 
My dad collected cars. He even composted them. Literally. When he died, we found 2 buried Caddys in the back 40 that his second wife did not even know about. He had over 20 cars and PUs, and 2 boats. My neighbor here collects old PU trucks. They are completely overgrown with blackberries. I counted over 100 when I walked back there last summer. Even he does not recall how many he has any more.

I had over 20 saws in my collection when I moved here 2 years ago. Then I sold over half of them. More from fear of theft or robbery and I did not have room for them all. Most of them were in boxes. The economy is thawing out and people are not unloading saws like they were 4 years ago. I have not bought any new or used saws in a while. I could get by with just one 026 and a 361. Or even just one 361. My precious! But 2 are more better.

I am sure we could all get by with a Home Depot special if we had to. It would not be fun, but we could do it.

Throwing the good stuff in the furnace tonight since it is supposed to be 10 degrees out and I will tell you, nothing like locust/oak/hickory compared to the cherry, sweet gum, and other wood I have been using until this week. Kind of like comparing a Stihl to other saws. Just not much else like it. I could probably get by with sweet gum, poplar, and pine, but who wants to do that unless utterly necessary.
 
Guns and chainsaws... now we are into the real interesting stuff!

I am long on .45 ACP and .223 ammo... but if you have some British .303 I could use some for my Enfield. I do not fire it that much though. It has a kick that is hard on my shoulder. I also need a smaller caliber semi-automatic to carry, as the 1911 is a bit large to lug around concealed. I like it for open carry on my thigh though. I want a single action 9mm or 10mm. Now that Obammy is flapping about gun control it is hard to even get into the door at the local gun shops. I will have to hit the next gun show in town.
You should look into Kahr Arms for a smaller framed sidearm. They build a solid and small framed gun.
 
You should look into Kahr Arms for a smaller framed sidearm. They build a solid and small framed gun.

Second that on the Kahrs, I have a K9 with the electroless Nickel finish with tritium night sights on it. Its what's by the side of the bed for when I get woke up in the middle of a dark night out here in the country................. My 3 radioactive dots clearly show where I'm aiming. They are DAO though, I think Stilhead was looking for something Single Action.
 
I passed on it. Too much money for that saw IMHO. I'll wait for the 660....;)
 
......if I do, I'll have to sell one from the stable. Probably will be the Husqvarna 372XP. Not that I don't like that saw, but if I get that 460 I really don't know that I'll need it.

The 460 looks pretty decent (it is used, but in good condition), compression is around 150lbs, it needs the throttle lock repaired which is an easy fix.....oh and it'll get a muffler mod too...

Might be able to tweak the price a little bit, but I think that would be a fair price as is.....

Thoughts? Discuss........

150 psi its not going to be a bad arse.
 
I passed on it. Too much money for that saw IMHO. I'll wait for the 660....;)

460 is a very hot saw but compression imo needs to be north of 165 and 190 seems to be the sweet spot. Oh and what the heck are you cutting for? Twin Out door wood burners? ;)
 
  • Like
Reactions: StihlHead
460 is a very hot saw but compression imo needs to be north of 165 and 190 seems to be the sweet spot. Oh and what the heck are you cutting for? Twin Out door wood burners? ;)

Those compression levels (190psi _g) do not happen with stock saws. ;)
 
  • Like
Reactions: smokinj
460 is a very hot saw but compression imo needs to be north of 165 and 190 seems to be the sweet spot. Oh and what the heck are you cutting for? Twin Out door wood burners? ;)

I think Scotty is morphing into MegaOverKill. He is dialing in his wood supply in for a new line of Quadrafire systems: The Quad OWB! Burns through 40 cords a year, keeps his place a nice tropical 85 degrees, heats his new Olympic size indoor pool year round to 80 deg. and his new giant hot tub to 104. A new de-icing hydronic system is being buried under his property to melt any snow that may fall anywhere near his house.

Got ice? Forget about it! A trip to Hawaii will only be a hour or two drive from anywhere in central PA!
 
Status
Not open for further replies.