cab50

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
I did reduce the feed a little thinking I had too much ash. We'll see how that goes. But I'm super happy that medium is doing sooo well for me. And as you've said Dex the quadrafire has a different heat exchange system. What are your burning right now? If you think the flame is lazy and my damper is all the way open what do you suggest? Close the damper or reduce the feed more?
 
i think the quad just moves a higher volume of air through the pot.

the blend does give a lot of lightweight fly ash.
and it is very dark too. i've burned about 6 1/2 tons of the blend so far over two winters.
even burning a 50/50 mix of the mwp softies and the blend, the ash is more a grey than the usual black.
and that's using the exact same settings.

imo, you're fine.
 
Thanks.. After I read a post and saw that black is not good I got concerned. It's not thick caked on. Just a coating. I knoticed it's darker with the air damper open and feeding more. So probably just more volume. Question for you. What do you do when the power goes out and the stove has been running? The exhaust blower etc all off. The power company turned off the power on my street once because they had to fix the line and my stove was running. Wasn't worried about the flame but the smoke seeped out into my house a little. I opened a window but what happens if you're asleep etc. Wouldn't know it then.
 
lots of folks have ups battery back up that will keep the stove running a short time to clear the smoke.
others depend on having good vertical rises in venting so the smoke most often just drafts up and out.

lots of threads on this. try ups as a search word.
though the topic also arises in a lot of the generator threads iirc.
 
Ok. Found out what it is. Do you have one and if so which one? Looking at radioshack. If I understand it correctly your plug it in then the stove into it and it reserves power and saves to the battery so if the power does go out it keeps your appliance running till it runs out. How does the stove know to start shut down?
 
Very Nice.

Compared to my Quad, it seems a little lazy. But I have only seen 2 Heatilators burn at Erics shop (15 min a piece?).

So that may be good? What setting is that? Low?
And as you've said Dex the quadrafire has a different heat exchange system. What are your burning right now? If you think the flame is lazy and my damper is all the way open what do you suggest? Close the damper or reduce the feed more? Also these were shortened videos after I emailed them to myself. Next time I'll download right from my phone to youtube. That should give the full picture.
 
uninterrupted power supply. used for computers a lot. most won't keep the stove running a long time. but enough to finish burning and exhausting what's left in the pot when the power goes out.
though some folks have rigged up larger battery systems with much longer run times.
like car batteries. then use the car to recharge batteries to swap into the system and others run low.

i just have a good vertical rise out of the stove and a not too long horizontal run out through the wall.
i get a good enough draft to clear the smoke when it loses power.
 
And as you've said Dex the quadrafire has a different heat exchange system. What are your burning right now? If you think the flame is lazy and my damper is all the way open what do you suggest? Close the damper or reduce the feed more? Also these were shortened videos after I emailed them to myself. Next time I'll download right from my phone to youtube. That should give the full picture.

Just purchase a upc for mine off of amazon for 139 delivered. It will run for 21 minutes after the power goes out.......should be enough time to let the stove shut down properly. I can also hook it up to my generator and it will clean the sine wave and prevent any surges. Harman recommended a couple different upc's so i just measured against what they recommended. I would double check with heatilator to what they recommend(prob the same as harman i'm guessing)
 
And as you've said Dex the quadrafire has a different heat exchange system. What are your burning right now? If you think the flame is lazy and my damper is all the way open what do you suggest? Close the damper or reduce the feed more? Also these were shortened videos after I emailed them to myself. Next time I'll download right from my phone to youtube. That should give the full picture.

Good job on the video...

As for my burning. I only use/need Low. Low will heat my house down to 10° outside. But that was before the Fahrenheit. Now, when it gets around 25° or lower, the Quad gets shut down and the furnace gets the dirty work :)

But the Quad never had a problem. The Classic Bay has one of the best exhaust path/heat exchanger set-ups I have seen. The Hot exhaust must travel the Full length of the tubes. Awesome stove. Awesome heat. Efficiency at its best. The AE's exchanger may be a little better, but compared to the Santa Fe and Castile, the Classic Bay wins the Quad Exchanger War!
 
Just purchase a upc for mine off of amazon for 139 delivered. It will run for 21 minutes after the power goes out.......should be enough time to let the stove shut down properly. I can also hook it up to my generator and it will clean the sine wave and prevent any surges. Harman recommended a couple different upc's so i just measured against what they recommended. I would double check with heatilator to what they recommend(prob the same as harman i'm guessing)
Thanks. I'll check it out. Power went out last night for only a minute. Luckily the stove had cycled being how mild it was. So I was good that time.
 
uninterrupted power supply. used for computers a lot. most won't keep the stove running a long time. but enough to finish burning and exhausting what's left in the pot when the power goes out.
though some folks have rigged up larger battery systems with much longer run times.
like car batteries. then use the car to recharge batteries to swap into the system and others run low.

i just have a good vertical rise out of the stove and a not too long horizontal run out through the wall.
i get a good enough draft to clear the smoke when it loses power.
I just made it with placement of the vent pipe because of windows etc. up 1 ft inside then out and 3.5 ft horizontal on an incline of a ft to ft and a half . We didn't get alot of smoke just enough to say open a window.
 
we didn't have much choice about placement either.
when i'm up on a ladder with the linteater, i wish we had.
 
we didn't have much choice about placement either.
when i'm up on a ladder with the linteater, i wish we had.
LOL.. It was that or an insert. Which originally was the way we were going to go. Glad we didn't. We have our fireplace for backup in case we lose power with a great fireplace grate. Generator is next on the list.
 
so read up on the generator topic as well. you need a clean sine wave to protect the motors and electronics.
"inverter generator" is the type. honda, yamaha and a few others at the top of the list. but not things i could afford right now.
look into what jbacon posted about his upc cleaning up the wave. i never remembered what the final word on that was.

pretty sure if a upc does that, it has to be specifically designed to.

like i said , i don't remember exactly. i do seem to remember, some of them at least, specifically do not change the wave to a clean sine wave.

it's a topic that is covered in extreme detail in the different generator threads.

maybe it's that they put out a clean wave on their own from their batteries, but don't necessarily change a dirty wave from a non inverter generator to a clean one.
 
so read up on the generator topic as well. you need a clean sine wave to protect the motors and electronics.
"inverter generator" is the type. honda, yamaha and a few others at the top of the list. but not things i could afford right now.
look into what jbacon posted about his upc cleaning up the wave. i never remembered what the final word on that was.

pretty sure if a upc does that, it has to be specifically designed to.

like i said , i don't remember exactly. i do seem to remember, some of them at least, specifically do not change the wave to a clean sine wave.

it's a topic that is covered in extreme detail in the different generator threads.

maybe it's that they put out a clean wave on their own from their batteries, but don't necessarily change a dirty wave from a non inverter generator to a clean one.
You're talking greek to me with the waves and such. But I'll research. I do have a surge protector on the stove so that is a plus. We don't have very many outages during the winter. Very rare...
 
not now with 50% softies.
but my experience with the blend all of last year and most of this year is they produce a very dark fly ash.

i've read others mention this too.

*you've got the damper all the way open now, right?
What did you think of my videos of my stove burning on medium with feed half and damper wide open? From one cab50 owner to another. :)
 
i've got the PS50. but they are essentially the same except mine has a smaller hopper.

looked like a very good burn to me.
the 1200 really must be a beast if that looks a little lazy to dex.
eventually i'd like to get a 1200 for upstairs and move helga to the basement.
i think a well heated basement in our house would allow a much cooler stove room during the really cold snaps.
plus it would be good to have options if anything ever went wrong with either stove.

we ran the forced air oil heat for a blast while i sorted out the auger jam a few days ago. oil heat sucks.

first ever jam in nearly two seasons. and i don't sift.
it was an upper/drop chute jam anyway. just a rare alignment of events.
 
You're talking greek to me with the waves and such. But I'll research. I do have a surge protector on the stove so that is a plus. We don't have very many outages during the winter. Very rare...

Surge protector won't protect against a cheap generator. Generators send "Dirty" Power (Not a constant voltage like the line to your home. The voltage varies with the RPM and load on the Genny.

Need an Inverter unit with Pure Sine Wave. Search those words here, and you will find plenty to read.
 
Surge protector won't protect against a cheap generator. Generators send "Dirty" Power (Not a constant voltage like the line to your home. The voltage varies with the RPM and load on the Genny.

Need an Inverter unit with Pure Sine Wave. Search those words here, and you will find plenty to read.
Thanks. Was reading alot of different things and was making my head hurt what they were talking about. I have written it down. You all have been a wealth of info!
 
St. Earl- I am uploading a Video of my Quad on Med (1st time in about 2 yrs its been moved to that setting) with the gate wide open (no Draft adjustment on Quads/ thats why I say the Heatilators should stay Wide Open, like they come from the factory)

Its a Giant Flame that is MUCH more active than Nikeseer's flame. Even if mine was 50% closed, the flame would be moving much faster.
 
i've got the PS50. but they are essentially the same except mine has a smaller hopper.

looked like a very good burn to me.
the 1200 really must be a beast if that looks a little lazy to dex.
eventually i'd like to get a 1200 for upstairs and move helga to the basement.
i think a well heated basement in our house would allow a much cooler stove room during the really cold snaps.
plus it would be good to have options if anything ever went wrong with either stove.

we ran the forced air oil heat for a blast while i sorted out the auger jam a few days ago. oil heat sucks.

first ever jam in nearly two seasons. and i don't sift.
it was an upper/drop chute jam anyway. just a rare alignment of events.
Thanks. I've run my oil heat once a month for a few hours just to put some hot water through the pipes. But its been between 54-58 in the basement all winter so far. When we used Oil it stayed about 10 degrees warmer down there but I'm only down there now to do laundry. My work desk used to be down there. Now I'm upstairs. So much better be upstairs working and now with our stove. After my jam I'm just a little obsessed with getting as much of the fines out of her as possible. Mine was the same upper/drop chute jam. Just hated it and don't want it again.
 
Surge protector won't protect against a cheap generator. Generators send "Dirty" Power (Not a constant voltage like the line to your home. The voltage varies with the RPM and load on the Genny.

Need an Inverter unit with Pure Sine Wave. Search those words here, and you will find plenty to read.
Looking forward to seeing it. It will give me info to see how my dad's should be burning!
 
Status
Not open for further replies.