From wood splitter to splitting by hand

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

westkywood

Feeling the Heat
Oct 14, 2009
420
Kentucky
I share a splitter with my brother that lives 30 miles away. I took it back to him about 2 weeks ago because I thought I was through with it for the season. There is a huge Red Oak almost right next door to me that is down and the owner told me to take what I want and what I don't take, he's just going to push into the woods with a dozer next Fall.. I've already got about 11 cords stacked so I'm not desperate for wood.
I've been slow at work (seasonal ) and I've been desperate for something to do outside. I drive by that huge Red Oak laying on the ground everyday that even has a driveway going right up to it and think, It just doesn't get easier than that. So I decided to go get a few more truckloads and hand split it. I haven't split by hand in many years. I split a whole truck load ( small bed ) in less than an hour and actually enjoyed it. I went and got 2 more truck loads and split them.
I wouldn't want to have to depend on splitting by hand but it was actually enjoyable. It helped that it was Red Oak which splits easy.
 
I split all mine by hand. If I can't split them the saw will. I split just about a half cord this afternoon , cherry and hard maple. Those are going in a rack for 2016. My racks hold a little over 3 1/2 cord. That is about one year burning for us.
 
Red oak is a breeze to hand split. I love getting big rounds cause they split even easier than branch pieces and you can make nice square splits from em
 
  • Like
Reactions: Backwoods Savage
I split by hand when splitting straight stuff. Splitter is nice when processing bigger and tough rounds.
 
I "share" a splitter with my dad who's only 1/4 mile away. I still split 99% by hand. For what I split (ash, maple, beech, and ironwood) it is way faster especially when you consider going to get the splitter, carting it around, filling it with gas, checking the oil, etc. The occasional crotch or twisted chunk I throw in a pile. I get the splitter once a year to bust up that pile.

I'll split as long as I can by hand. It's good exercise and great stress relief. Also, I have enough engines and noise in my life as it is.
 
Agree. A splitter is great to have to do the knotty or twisted stuff. Less wood wasted. And of course depends on what kind of wood is being split. But I gotta say, even though I enjoyed splitting that wood by hand. It sure is quicker with a splitter.
 
I still have to smile every time I start splitting with the hydraulics. Just makes things so much easier. But then, I suppose age has something to do with that too along with a few physical problems.
 
I split everything by hand. I guess I will until I can't.
Good exercise and I can split it the size I want.
 
I split the easy stuff by hand....way faster. Doesn't get any easier than red oak.
 
Hand splitting Red Oak with a good tool is darn near child's play. I think I could hand split straight Red Oak faster by hand than i could with a machine. I hand split all my wood so I stay far enough ahead that I can turn down anything that won't be easily split by hand.
 
  • Like
Reactions: WoodpileOCD
I wouldn't want to have to depend on splitting by hand but it was actually enjoyable. It helped that it was Red Oak which splits easy.
I love whackin' me a few rounds. :)
 
  • Like
Reactions: gyrfalcon and ScotO
I used to split red oak by hand, but my hand got sore ;lol
I am 62 years old. I got a Fiskars X27 three years ago and don't use my maul anymore. With that axe, I don't need a hydraulic splitter. Seriously, last year I split 11 cords of mixed hardwoods. This year only about 6-7 of hard and soft woods as my wood needs have decreased. Using low-mass solar sunspaces, I hope to need less wood again next year; perhaps in the 4-5 cord range. That volume will be child's play with a good axe. I've lost 5 belt sizes since I started heating with wood. It is not easy, but it's wonderful exercise. No noise except the birds, no smell except wood and flowers, no gas, no oil changes or maintenance. The downside... sweat, and more laundry.

I use a block with tires to lower the probability of a mis-strike. I also used a technique I found on the internet, that involved tying a half cord up with a rope and bungee, then going postal on the circle of rounds. The demo guy on Youtube split a half-cord in six minutes into small splits (4-5"). A young man can definitely outpace a splitter with that method if his wood is uniform length.

I have used a hydraulic splitter for 2 seasons, a real good one with a lift. It is better for gnarly pieces but noodling gnarly pieces is pretty effective
 
Nothing like splitting by hand! I realize there is a place for hydraulics but not for me yet.
 
  • Like
Reactions: Scols and Thistle
I split pretty much all by hydraulics from the blocking state. I guess I never picked up the technique, to much stooping and bending for me and my back. Now, when I take my seasoned wood to the house. I'll usually end up splitting some of the bigger chunks, up with the Fiskers. I usually enjoy that part, just because there a small enough quantity, not to bother my back.
 
  • Like
Reactions: Redlegs
I share a splitter with my brother that lives 30 miles away. I took it back to him about 2 weeks ago because I thought I was through with it for the season. There is a huge Red Oak almost right next door to me that is down and the owner told me to take what I want and what I don't take, he's just going to push into the woods with a dozer next Fall.. I've already got about 11 cords stacked so I'm not desperate for wood.
I've been slow at work (seasonal ) and I've been desperate for something to do outside. I drive by that huge Red Oak laying on the ground everyday that even has a driveway going right up to it and think, It just doesn't get easier than that. So I decided to go get a few more truckloads and hand split it. I haven't split by hand in many years. I split a whole truck load ( small bed ) in less than an hour and actually enjoyed it. I went and got 2 more truck loads and split them.
I wouldn't want to have to depend on splitting by hand but it was actually enjoyable. It helped that it was Red Oak which splits easy.
I also hand split everything, keeps me in shape. I cut alttle then I split it. the crotches of the tree are my all nighters.
 
I used to split red oak by hand, but my hand got sore ;lol
I am 62 years old. I got a Fiskars X27 three years ago and don't use my maul anymore. With that axe, I don't need a hydraulic splitter. Seriously, last year I split 11 cords of mixed hardwoods. This year only about 6-7 of hard and soft woods as my wood needs have decreased. Using low-mass solar sunspaces, I hope to need less wood again next year; perhaps in the 4-5 cord range. That volume will be child's play with a good axe. I've lost 5 belt sizes since I started heating with wood. It is not easy, but it's wonderful exercise. No noise except the birds, no smell except wood and flowers, no gas, no oil changes or maintenance. The downside... sweat, and more laundry.

I use a block with tires to lower the probability of a mis-strike. I also used a technique I found on the internet, that involved tying a half cord up with a rope and bungee, then going postal on the circle of rounds. The demo guy on Youtube split a half-cord in six minutes into small splits (4-5"). A young man can definitely outpace a splitter with that method if his wood is uniform length.

I have used a hydraulic splitter for 2 seasons, a real good one with a lift. It is better for gnarly pieces but noodling gnarly pieces is pretty effective
Love the "going postal" technique!

I do most stuff by hand, too, but I have a 4-ton electric splitter I haul out for the tough stuff, but it is slow. When I'm in the mood, I also love doing battle with a tough piece by hand, though.

I haven't counted belt sizes, but I've also gotten slimmer and definitely in better shape all the way around since I started heating with wood since I'm getting good exercise almost every day during winter between the splitting and the lugging. I laugh when friends back in the burbs have to pay money to join a gym to get exercise. Exercise that saves you a bunch of money is a far better deal.
 
Splitting by hand is by far my favorite part of firewood processing. I like splitting more than burning.
 
  • Like
Reactions: guy01
....................................So I decided to go get a few more truckloads and hand split it...............................I wouldn't want to have to depend on splitting by hand but it was actually enjoyable. It helped that it was Red Oak which splits easy.

Nice work there!! I've hand split all my life and I'm just about 58. It helps that I'm burning mostly "top rounds" as I sell much of my trunks for timber, but I still get into my fair share of upper knotty branched trunks. A splitter is definitly in my future though!

Grab the rest of that oak and finish it up!
 
Nice work there!! I've hand split all my life and I'm just about 58. It helps that I'm burning mostly "top rounds" as I sell much of my trunks for timber, but I still get into my fair share of upper knotty branched trunks. A splitter is definitly in my future though!

Grab the rest of that oak and finish it up!

I'm going back for a little more of the wood. Most of what is left is the trunk and it is HUGE. Way bigger than I want to deal with. I already have 11 cords. I'm runnin outa room here.
 
Status
Not open for further replies.