372XP and 575XP? Differences?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
D

DexterDay

Guest
What are the notable differences in the 372 and 575? And why would you rather have one over the other.

I have always wanted a 372xp, but have the opportunity to get a near mint 575xp for a pretty good cost. I assume weight is more on the 75, but any reasons to Not get it? Known problems, etc?

Thoughts and comments are appreciated :)

Thanks
 
  • Like
Reactions: smokinj
575XP was one of the first Strato-charged XP saws. Relatively heavy compared to the 372XP and the 576XP, more pork than a MS460 and .6bhp short.

Known for low-vibe and good filtration, like a lot of Swedish hardware, but I'd hold out for that 372XP (the older version) or a 576XP.
 
  • Like
Reactions: Nixon
I just bought two 372xp's from loggers. They had nothing good to say about the 575 or 562.
 
I just bought two 372xp's from loggers. They had nothing good to say about the 575 or 562.

I just bought another 372XPW from a guy moving to Guam who wasn't going to need it for $450 and it's in dang near mint condition. Deciding if this is the one I want to woods port and fully mod. Having run several saws and owning several different ones, the 372 is a better saw IMO than the 575. The difference is it has a hard time meeting the new EPA regs.
 
  • Like
Reactions: smokinj
I just bought another 372XPW from a guy moving to Guam who wasn't going to need it for $450 and it's in dang near mint condition. Deciding if this is the one I want to woods port and fully mod. Having run several saws and owning several different ones, the 372 is a better saw IMO than the 575. The difference is it has a hard time meeting the new EPA regs.

$450.00 go all in!
 
The difference is it has a hard time meeting the new EPA regs.

Not the new 372's. They are strato-charged like the 575 and the 576. The 576XP is what the 575 should have been IMO. Plus it comes with AutoTune. >>
 
Ahhhh!!!

Pics to come. I couldn't pass on it. It's a BIG Saw, but less than my 460 in cc's.

Sometimes, you gotta buy something. Especially if you Know you can make your money back!

Also, I am likely gonna sell one of my 036's on fleBay, both of my 036 Pros and my standard 036 are nicer than all the 036's on there now and some are fetching over $500!! That's ridiculous. But if I can get $300-$400 for one of mine (y'all have seen pics, them chits is clean ;)) then I will be a happy camper.

As for the 575xp, I have now read several threads here and on AS. It's known for its heaviness (noted above), and also some bearing issues in the bottom end (this is what scares me).

Pics will be forth coming soon. I need a Bar and a new chain..

Here is one I have that I copied. But I didn't take it. Though this is the actual saw...

image.jpg
 
  • Like
Reactions: smokinj
Ahhhh!!!

Pics to come. I couldn't pass on it. It's a BIG Saw, but less than my 460 in cc's.

Sometimes, you gotta buy something. Especially if you Know you can make your money back!

Also, I am likely gonna sell one of my 036's on fleBay, both of my 036 Pros and my standard 036 are nicer than all the 036's on there now and some are fetching over $500!! That's ridiculous. But if I can get $300-$400 for one of mine (y'all have seen pics, them chits is clean ;)) then I will be a happy camper.

As for the 575xp, I have now read several threads here and on AS. It's known for its heaviness (noted above), and also some bearing issues in the bottom end (this is what scares me).

Pics will be forth coming soon. I need a Bar and a new chain..

Here is one I have that I copied. But I didn't take it. Though this is the actual saw...

View attachment 97315

Can't hurt to try it out, run it to say you did, and flip it if you don't like it.

I think you're gonna like your 460 much better but I'm looking forward to your review. ;)
 
  • Like
Reactions: Nixon
Ahhhh!!! ........................... Also, I am likely gonna sell one of my 036's on fleBay, both of my 036 Pros and my standard 036 are nicer than all the 036's on there now and some are fetching over $500!!...........................

You've got a gold mine in those 036s, my 036 "Pro" and my 024 are all I've been cutting with lately. I see you still have that 260 ............................. I thought you were trying to sell that one?
 
  • Like
Reactions: DexterDay
Should be smoother than the 460, but other than that.................I'm also interested in your review
 
  • Like
Reactions: DexterDay
Should be smoother than the 460, but other than that.................I'm also interested in your review
Power is much Smoother. Seems as if Husqs have a much broader Powerband. Lots more torque on the bottom and mid, where my 460 is all upper mid to Top end.

The anti vibe seems better too. I only bucked up a small Elm and 2 small Cherries. But it ran awesome, felt awesome, and sounds pretty good too.. :)

Ordering a new 24" bar for it. Would seem better balanced with a longer bar. Plus less bending over.

2013-03-23_18-06-06_626.jpg 2013-03-23_18-26-17_983.jpg
 
Power is much Smoother.

That saw is on springs right? That would explain why it's much smoother than the MS460.

Seems as if Husqs have a much broader Powerband. Lots more torque on the bottom and mid, where my 460 is all upper mid to Top end.

I'm guessing that's because it's strato-charged. That seems to be a common theme regardless of brand, the strato saws gots more umph down low. The same comment has been made regarding the MS461 vs the MS460.
 
That saw is on springs right? That would explain why it's much smoother than the MS460.



I'm guessing that's because it's strato-charged. That seems to be a common theme regardless of brand, the strato saws gots more umph down low. The same comment has been made regarding the MS461 vs the MS460.

Yeah. Its on Springs :) and very noticeable

Even my 455 Rancher had gobs of torque down low..... And I paid less than what I paid for my Rancher
 
You Ohio boys want something you get it. :p

Now call in sick and cut some wood dammit. ;)
 
  • Like
Reactions: DexterDay
Its in the pics above. On the ground next to the 575xp.

I can send more pics or post them here. Will send PM

The nice thing about eBay is it tends to fetch top dollar. For what I have in them and the condition there in (all 3 of them)? I would start the bidding at $300..

2013-01-09_17-58-16_855.jpg
 
Status
Not open for further replies.