New tractor

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
I went with New Holland because my brother is a New Holland Master Mechanic and says this model is bullet proof.​

That looks like a TC30 or similar? If so, your brother is right. :cool:

We need to see some action shots of this thing!
 
  • Like
Reactions: Jack Straw
Congrats on the tractor, Jack!

Also, nice decision on getting the pallet forks. I never thought I would use mine as much as I do.
 
  • Like
Reactions: Jack Straw
MM-it's a TC 35

I have most of my wood stacked on wood racks and I am hoping to move them with the forks.
 
  • Like
Reactions: MasterMech
Just be sure you keep some ballast on the back and keep her in 4wd, or back down hills, when you have a heavy load on the front. DAMHIKT. I'll just say that tractors don't often have front brakes, so you don't want the rear getting too light on a slippery hill!
 
  • Like
Reactions: Jack Straw
Congrats, I have a Workmaster 75. I am guessing the quick attach on the FEL is the same as on mine in that it is the same as a skidsteer? I like that on mine, I can use the attachments on both and load attachments onto my equipment trailer with the tractor FEL. That is one point where John Deere really falls short. I was just using a brand new 5 series one last week and it was a PITA.
 
Congrats, I have a Workmaster 75. I am guessing the quick attach on the FEL is the same as on mine in that it is the same as a skidsteer? I like that on mine, I can use the attachments on both and load attachments onto my equipment trailer with the tractor FEL. That is one point where John Deere really falls short. I was just using a brand new 5 series one last week and it was a PITA.

I believe it is the same as the skid steer and I read that John Deer has there own type of system.
 
If I could do my acreage all over I would start with a new little tractor and all the attachments like yours with the addition of one of those little backhoes on the back. The new stuff all comes on an off much easier than the old too. Enjoy!
 
Deere has a decent quick-tatch system... but they have to do things just a little different, being Deere. Their system does not play well with others.
 
Jack if we don't see you posting on here much, we know where you are and what your probably doing,, siting on something blue;lol Enjoy it! Nice tractor!
 
  • Like
Reactions: Jack Straw
Jack if we don't see you posting on here much, we know where you are and what your probably doing,, siting on something blue;lol Enjoy it! Nice tractor!

Well my swamp like land has to dry up before I can do much. For now I have to use the Honda Foreman.
 
If it is a standard skid steer mount, you can add an Auxiliary hyd. valve and use a grapple bucket.
 
  • Like
Reactions: TreePointer
Just be sure you keep some ballast on the back and keep her in 4wd, or back down hills, when you have a heavy load on the front. DAMHIKT. I'll just say that tractors don't often have front brakes, so you don't want the rear getting too light on a slippery hill!

Leave it in 4WD. Makes it a four wheel braking system. ;)

And yes, proper ballast is not an option.

These days, John Deere offers their own JD quick attach or the universal quick attach.

The attachments for the JD system are generally suited for compact tractors. The universal, or skid steer style, while very robust, usually takes attachments and/or buckets that are also very HD compared to the ones intended for CUT use. While that may seem great, the heavy buckets/attachments are often way overkill and only subtract from the actual amount of work the loader can do. I wouldn't even consider it for anything under 40HP unless you absolutely had to use it for a "must-have" attachement. Especially since Deere makes some pretty bullet-proof HD bucket options for the CUT loaders.
 
  • Like
Reactions: Jack Straw
Leave it in 4WD. Makes it a four wheel braking system.

Yes... I learned that the hard way, one day. Made for an exciting ride down the hill! Thankfully, all ended well. Now, she's always in 4wd whenever there's any sort of load in the bucket, and I back down big hills when carrying anything real heavy.
 
  • Like
Reactions: Jack Straw
+1 on the 4x4 braking on an incline. Bucking logs off the forks will spoil you. I drive them right to the stacking area with the splitter sitting there. C/S/S without ever fully lifting the rounds (milk crate style but I prefer thr height of a round).
 
Thanks for all of the compliments and the advice. Sounds like I should keep her in 4 wheel drive mowing around the pond. The tires are loaded and I could use the box scraper for ballast. I am hoping to use the forks to carry logs out of the woods.
 

You need to be careful. My wife knows a guy who bought a used tractor. He borrowed a large sum of money for it and when he took it to the dealer for service they ran the serial number and it came back stolen. He now has a monthly tractor payment and no tractor. You also need to mark sure the tractor is paid or or will be after you buy it.
 
Nice!

We have a NH dealer near us, and they have quite a bit of nice stuff. They used to be a Massey dealer, and they take a lot of Masseys and Fergusons (Yeah, lots of pre 56 stuff there). I am a cheap SOB, so I prefer to buy the trade ins that accumulate at the dealer's lot at the local equipment auction. I can tolerate a lot of damage for the prices, and old gas stuff goes really cheap around here.

I suspect that I have this tendency because It would kill me to scratch new paint. I cant even buy a new car for that reason.

Have fun!
 
The dealer stole it back from him? Pretty sure I'd stop paying that loan!

You need to be careful. My wife knows a guy who bought a used tractor. He borrowed a large sum of money for it and when he took it to the dealer for service they ran the serial number and it came back stolen. He now has a monthly tractor payment and no tractor. You also need to mark sure the tractor is paid or or will be after you buy it.
 
The dealer stole it back from him? Pretty sure I'd stop paying that loan!

He bought it used from an individual....I don't know what happened to the guy he bought it from.
 
Status
Not open for further replies.