Moving a lot of wood

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

mtneer

Member
Mar 29, 2011
49
huntington, wv
I was wondering if anyone here had experience moving their stacks between homes and what vehicle they used. I'm moving about 40 minutes away and I need to take about 10 c/s/s cords with me. No way am I leaving much of this for the next owners due to the amount of work put into it. I think a coal truck would be great if I can rent one.


I'll have to post about the stove in the new home. It's an old Squire insert that's hooked right up to the central furnace to distribute heated air throughout the house. The guy studied the new EPA designs and welded in secondary tubes and a firebrick baffle system. Really slick. Can't wait to test drive it.
 
  • Like
Reactions: ScotO
Bobcat and dump truck
 
See if you can get a roll off dumpster, preferably a clean one. Work a deal with the operator since it isnt going to the dump.
 
I'm in the middle of moving my stacks. Moved 9 cord so far, but that was the easy half. The first round was on pallet racks, I loaded on the trailer with a tractor and unloaded with a bobcat. What is left is the stacks that aren't in racks. Planning on just throwing those splits in my box trailer and hauling them over.
 

Attachments

  • image.jpg
    image.jpg
    423.5 KB · Views: 182
  • image.jpg
    image.jpg
    290.6 KB · Views: 163
  • Like
Reactions: Trilifter7
I'm in the middle of moving my stacks. Moved 9 cord so far, but that was the easy half. The first round was on pallet racks, I loaded on the trailer with a tractor and unloaded with a bobcat. What is left is the stacks that aren't in racks. Planning on just throwing those splits in my box trailer and hauling them over.
Man swag, I like that old tractor. That will pull most anything.
 
I was wondering if anyone here had experience moving their stacks between homes and what vehicle they used. I'm moving about 40 minutes away and I need to take about 10 c/s/s cords with me. No way am I leaving much of this for the next owners due to the amount of work put into it. I think a coal truck would be great if I can rent one.


I'll have to post about the stove in the new home. It's an old Squire insert that's hooked right up to the central furnace to distribute heated air throughout the house. The guy studied the new EPA designs and welded in secondary tubes and a firebrick baffle system. Really slick. Can't wait to test drive it.
Call a local excavating company who has a loader and a triaxle dump truck. It can all be done in one afternoon. No fuss no muss. It may cost 500.00 or so but you wont have to handle it. A local business may make you a deal. All my wood comes off my farm so its free to me. If I had to move it I would do this, if I was moving.
 
I'm in the middle of moving my stacks. Moved 9 cord so far, but that was the easy half. The first round was on pallet racks, I loaded on the trailer with a tractor and unloaded with a bobcat. What is left is the stacks that aren't in racks. Planning on just throwing those splits in my box trailer and hauling them over.
I would love to see your fork setup for your old tractor. That IS a worthwhile post!
My father made a homemade one but its way too heavy duty for some of our older tractors.
 
I would love to see your fork setup for your old tractor. That IS a worthwhile post!
My father made a homemade one but its way too heavy duty for some of our older tractors.
I will get a close up picture of it for you when I can get over there. Its still at my old house for a few more days until I get the rest of my stuff moved.
It is a set of forks from an actual fork lift boom. I almost bought a cheaper set from tractor supply but man am I glad I didn't. This set is great, the forks pivot so if I don't have the perfect angle they still work.
 
  • Like
Reactions: Applesister
I was wondering if anyone here had experience moving their stacks between homes and what vehicle they used. I'm moving about 40 minutes away and I need to take about 10 c/s/s cords with me. No way am I leaving much of this for the next owners due to the amount of work put into it. I think a coal truck would be great if I can rent one.


I'll have to post about the stove in the new home. It's an old Squire insert that's hooked right up to the central furnace to distribute heated air throughout the house. The guy studied the new EPA designs and welded in secondary tubes and a firebrick baffle system. Really slick. Can't wait to test drive it.
Oh, I like your nuts picture. Hickory or butternut?
 
I will get a close up picture of it for you when I can get over there. Its still at my old house for a few more days until I get the rest of my stuff moved.
It is a set of forks from an actual fork lift boom. I almost bought a cheaper set from tractor supply but man am I glad I didn't. This set is great, the forks pivot so if I don't have the perfect angle they still work.
Yes thanks!! I know you guys sound busy. I'll remember if you forget.
 
I would love to see your fork setup for your old tractor. That IS a worthwhile post!
My father made a homemade one but its way too heavy duty for some of our older tractors.
Here you go sister, forks that were converted to a three point attachment.
 

Attachments

  • image.jpg
    image.jpg
    227.8 KB · Views: 141
  • image.jpg
    image.jpg
    184 KB · Views: 137
  • image.jpg
    image.jpg
    174.4 KB · Views: 114
Thanks for the help everyone. A friend of a friend works for a contractor so maybe I can get something on the cheap. Now I just need to figure out where to stack all the wood on my mostly hilly new property.



There's a joke here but I won't go there. Hickory ==c
A double entendre? lol Its still a great picture even if I was smirking.
 
Here you go sister, forks that were converted to a three point attachment.
Thanks so much for the pics. I devoured every pixel. Im glad I saw the pics of the MF135 too. A friend almost got one in a trade and he said it came with a loader on it. Always handy. I was really curious about that model.
I scrutinized the 3pt hitch connections. Bolts to the drawbar. Did you add like stabilizer arms to the bottom lift arms? Or is that how the 135 is set up?
Great way to move wood.
 
Thanks so much for the pics. I devoured every pixel. Im glad I saw the pics of the MF135 too. A friend almost got one in a trade and he said it came with a loader on it. Always handy. I was really curious about that model.
I scrutinized the 3pt hitch connections. Bolts to the drawbar. Did you add like stabilizer arms to the bottom lift arms? Or is that how the 135 is set up?
Great way to move wood.
yes I love that thing for moving firewood, I did learn to not use large skids as they tend to get a little too heavy. The normal 42" skids are about perfect.
The bolts on the drawbar are connected to brackets on what used to be the mast on the towmotor. The Stabilizer arm is separate from the bottom lift arm, and it really helps those skids from shifting sideways.
 
  • Like
Reactions: Applesister
yes I love that thing for moving firewood, I did learn to not use large skids as they tend to get a little too heavy. The normal 42" skids are about perfect.
The bolts on the drawbar are connected to brackets on what used to be the mast on the towmotor. The Stabilizer arm is separate from the bottom lift arm, and it really helps those skids from shifting sideways.
Okay, yeah those arms do swing back and forth. Well you got yourself a great implement there, maybe a Patent if it was your idea? Or even if it wasnt your idea. Thanks for sharing. Handy dandy farm devises!
My dad made one and its too heavy in its own right. But we use it for apple crates. Overkill apple bin lifter.
 
Do you happen to know what those forks are originally off of?

Might be able to convince my DW that this is a labor saver and get some new toys..... (at the expense of selling some old toys :( )
 
Do you happen to know what those forks are originally off of?

Might be able to convince my DW that this is a labor saver and get some new toys..... (at the expense of selling some old toys :( )
They came off of a boom on a tow motor. Aka forklift
 
Ahh, OK. I just wasnt sure what actual forklift they were from, since it looks like it wasnt too bad of a bolt-up. Thats a pretty sweet setup.

Considering getting something like that and making some pallet U's to put firewood in, might save me from having to stack-move-restack....
 
  • Like
Reactions: swagler85
Ahh, OK. I just wasnt sure what actual forklift they were from, since it looks like it wasnt too bad of a bolt-up. Thats a pretty sweet setup.

Considering getting something like that and making some pallet U's to put firewood in, might save me from having to stack-move-restack....
That is exactly what I do and it saves a ton of time
I built bith the pallet U and a pallet rack. Like the U better now
 
I like the 135, also considering a MF 202 (which is an industrial MF35), which should do the trick nicely, I would hope.

If/when I ever get there Ill have to post some pics!
 
I like the 135, also considering a MF 202 (which is an industrial MF35), which should do the trick nicely, I would hope.

If/when I ever get there Ill have to post some pics!

Yep, the old MF 135. Grew up with one of those. Clutch driven PTO. Always ran the PTO tiller for the garden and farm. That thing used to get so hot it would throw flames from the tail pipe. We had a January night once when we lost power; colder than sh$$. The old fergie was the only thing that would start. Ran the PTO generator just fine for hours.

Sure loved that tractor.
 
  • Like
Reactions: swagler85
Status
Not open for further replies.