12 in and 12 in or 18 in and 6 in...

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Ram 1500 with an axe...

Minister of Fire
Mar 26, 2013
2,327
New Jersey
Which would you cut if some dumb Azz cut a round to the dimension of 24 inches.... Thanks
Oh my stove takes 18-22 in.... Any reasons why you pick the way you do?..........................thank you
 
I'd simply cut a cookie off the end. You can later burn those cookies. They work great for daytime and also when you don't need a full load of wood. In addition, it is easier, usually, to cut off 2" rather than cutting it in half or the other dimension.
 
I'd simply cut a cookie off the end. You can later burn those cookies. They work great for daytime and also when you don't need a full load of wood. In addition, it is easier, usually, to cut off 2" rather than cutting it in half or the other dimension.[/quote
What if they are 6 inch cookies, I'm getting a pile of them, they are all red oak.....
 
Yep I cut the least I can to make my 16 inch piece.
You end up with a lot of 3 or 4 inch thick rounds. Great to burn them too.
 
Thanks Dennis, sorry I wasn't thinking, I was rocking out to some tunes and cooking for the wife and kids while posting that.....:)
 
  • Like
Reactions: Backwoods Savage
How deep is your stove for N/S loading? If it is more than 12"deep if you cut them in half you would have the option of loading N/S.
 
Another great idea, Nick Mystic...that's why we are all here, to teach and learn.....thanks
 
12+12...
 
For my stove, I would do 12X12 cause I could load em north-south. Also, you can stack 12" long splits just fine.
 
Well ! this dumb a$$ got on a roll, and forgot to cut the round to length before splitting, than had to recut 2" off all the splits :mad:

IMG_20131018_175814.jpg IMG_20131018_180802.jpg
 
Well, just a little more word to do. At least you have the jig for doing it right.
 
  • Like
Reactions: HDRock
Well, just a little more word to do. At least you have the jig for doing it right.
Yeah , I was glad to have it when I screwed up , It was pretty quick n easy , I love that multi jig , use it a lot. No bending over :)
I have more splits in the stacks from old the stove that will need trimming
 
whenever I have the end of a log that is too long I cut it halfway and cross stack in the middle of the pile.
Figure a few N-S loads on occasion or smaller reload will be needed when picking through
 
Looking good guys and great answers, I think I'm gonna make an area where i Can shingle out some cookies as well as make a special 12" stack.....I love your ideas and HD Rock, that's a pretty cool rack that looks like it works well......
 
  • Like
Reactions: HDRock
I burned some short chunks the other day, lined em them up n/s in the stove worked out good ,like full splits
I always cut odd length's to 17" , cuz my stove is square 18", then throw the chunks in the crates
 
I burned some short chunks the other day, lined em them up n/s in the stove worked out good ,like full splits
I always cut odd length's to 17" , cuz my stove is square 18", then throw the chunks in the crates
What size box on your Lopi? My Princess is 2.8 and it's 18 in square too, I try and cut my wood 17 inches too if I can. I burn shorties in shoulder season.
 
What size box on your Lopi? My Princess is 2.8 and it's 18 in square too, I try and cut my wood 17 inches too if I can. I burn shorties in shoulder season.
Yours must be taller , cuz my Lopi is 2.2cf
 
Status
Not open for further replies.