Vermont Castings Resolute I efficiency

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Komrade

Member
Jan 3, 2014
26
Eastern Panhandle (WV)
I searched, but couldn't find any info. Are there any official or estimated numbers?

I know it's old, but it also burns wood gas. Any way to determine that's actually happenning, btw?
 
Revisiting the numbers EPA posts, looks like they pull them out of their you know what..
All stoves with catalytic seem to have efficiency 72, all modern non-catalytic stoves seem to have efficiency of 63, all pellet wood stoves seem to have efficiency of 78.

I highly doubt stove performance is that uniform,
 
Revisiting the numbers EPA posts, looks like they pull them out of their you know what..
All stoves with catalytic seem to have efficiency 72, all modern non-catalytic stoves seem to have efficiency of 63, all pellet wood stoves seem to have efficiency of 78.

I highly doubt stove performance is that uniform,

Those are default efficiencies. Reality is very different. Each stove, wood, operator, chimney is going to differ - sometimes greatly.

It's probably smarter to underestimate in most cases...closer to the truth. Common sense will indicate that a free standing stove with an interior chimney and a few feet of exposed stovepipe will do much better than an insert with panels around it back in a cold fireplace. So a non-EPA old resolute burned correctly in the middle of a room will probably beat many EPA inserts in actual delivered efficiency into a room.
 
Status
Not open for further replies.