Log Splitter Purchase

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

mudbug250

Burning Hunk
Dec 17, 2011
235
Central Mississippi
I will probably buy a Huskee 22 ton log splitter from TSC this week. Signed up for their credit card online to get the 12 months no interest deal. They have two units in stock. What are some things I need to check before I make the purchase?
 
Wait for a 10% off coupon. Save yourself 99.00 dollars.

I wish I was getting one. I like swinging the axe. Splitters are nice for my "I can't crack it pile"

I've heard nothing but good things about a Huskee. Some of the nuts may be lose (just tighten them). Good luck
 
I just was looking them over last weekend. I would go for the mid range 28tonner. Has all the features of the 35T in what should be a little quicker package and still have way more than most need in power.
 
When you get it home check the bolts and the fluids. Other than that... enjoy!

I'm three weeks into my 22-ton Huskee and couldn't be happier. Who knew that splitting wood could be so much fun!
 
Since you didn't ask us if you should buy it or not, I'm going to answer your question...

Like the others said, check all the nuts and bolts for loose connections. And, since they are promising free fluids right now, make sure that the oil and hydraulic tanks are full.

By the way, I wouldn't try to talk you out of it anyway. You're getting a great splitter. They've been running them for $999 lately so I hope you're getting a good deal.
Also, I've heard from other that said they got a ten percent discount for opening an account but that deal might not fly with a year of no interest.

Let us know how things go when you put it to work!
 
Welcome to the forum mudbug250.

That splitter should do everything you need done. It is very similar to our 20 ton MTD but I think the motor is a bit larger now. Our MTD came with a 5 hp B&S motor. It is over 20 years old now and still going strong and trouble free. Be sure to run that thing in vertical mode. Stand the logs on end just like you do when splitting by hand. Makes the work much easier. Vertical is the way God splits wood.
 
Backwoods Savage said:
Vertical is the way God splits wood.

Don't forget the milk crate! ;-)
 
wkpoor said:
I just was looking them over last weekend. I would go for the mid range 28tonner. Has all the features of the 35T in what should be a little quicker package and still have way more than most need in power.

The 28 ton uses the same pump as the 22 ton but on a bigger cylinder. Makes for a huge cycle time penalty (S-L-O-W). Same size engine albeit I'll take the Honda GC series over the 22 ton's Briggs anyday. If I were buying a bigger unit than the 22 ton, I'd be looking at the 35ton but then again, at $1900, I'd be looking at some other brands too. You're in Iron & Oak territory at $1900+.

+1 to the OP on double checking the assembly of that unit when you take it home. Check the hoses/fittings for leaks frequently the first few times you use it. Order up a 33flame table for it if 100% vertical splitting isn't your thing ;-) and have at it.
 
Haven't found anything my 22 ton speeco won't split.
Good splitter with a cradle beam, like mine :)
Check the tightness coupling screws,
Sound like a good deal, have fun.
 
I bought a 22-ton Huskee at TSC a couple of weeks ago. There were a few to pick from and I noticed that one of them was a bit different from the others. The trailer jack on one was like the ones on the 35-ton models that has a nice broad footplate and crank to set the height. The others had what I consider to be more of a kick stand. I went for the one with the crank.

I pointed the difference out to the TSC guy hooking the splitter up to my truck and he said that it is a recent change. So see if your TSC has the newer style jack available if that interests you.

It makes leveling the splitter on lumpy ground a lot easier. Plus the risk of smashing a finger while hooking up to the hitch is a lot less. I have read about folks picking fingers with the kickstand models. Perhaps this is the reason of the redesign?
 
I really did not have a question of wether to buy the Huskee or not. I have been doing my research and found this to be the best deal for the money. I would definetly like to go bigger, but can not justify the price of the 35 ton model. I just sold some stuff last night, so I have $500 cash in hand. So I am gonna go today or tomorrow and pick one up, put the balance on the TSC credit card, and pay it off in February when I have some more "extra" money coming in. Can't wait to get to cuttin, splittin and stackin.
 
Just to be clear, the most recent 22-ton models being shipped from the factory have been updated to include the trailer jack that is the same as the 35-ton model. The website still shows the old style in the picture and the TSC that I went to had a mix of 22s with both style trailer jacks.

I too could not justify purchasing the 35-ton splitter and go the 22 with the new trailer jack. Sorry if there was any confusion.
 
Love my 35T Huskee, but with a 12.5 hp B&S I/C engine it does burn a tank of gas rather quickly. A person may not have to fill the gas cans as often with the 22T splitter (back when I bought my 35T the 22T had a 6.5 hp B&S).
 
wetwood said:
Love my 35T Huskee, but with a 12.5 hp B&S I/C engine it does burn a tank of gas rather quickly. A person may not have to fill the gas cans as often with the 22T splitter (back when I bought my 35T the 22T had a 6.5 hp B&S).

The little Briggs is thirsty too. Noticed that with my friends 22 ton. One of the drawbacks to the Huskee splitters is the two best models have the least desirable engines. Put a Honda GC on the 22 and a Robin on the 35 and you'd be set.
 
I am not to worried about the gas consumption. I will be splittting real close to my house, plus I plan to pull the splitter behind my kawasaki mule when I need to move it around my property, so I will just throw a can in the back of it. I am lucky that we have several gas stations around where I live that sell ethanol free gas. That is all that goes in my small engines and my Scag zero turn.
 
Backwoods Savage said:
Vertical is the way God splits wood.

Classic! Laughed out loud on this one!

Vertical works for me!
 
Backwoods Savage said:
Welcome to the forum mudbug250.

That splitter should do everything you need done. It is very similar to our 20 ton MTD but I think the motor is a bit larger now. Our MTD came with a 5 hp B&S motor. It is over 20 years old now and still going strong and trouble free. Be sure to run that thing in vertical mode. Stand the logs on end just like you do when splitting by hand. Makes the work much easier. Vertical is the way God splits wood.

Well you are a Fire God, right . . . so I guess we cannot dispute this statement. ;) . . . but that said . . . I'm still splitting horizontally . . . probably breaking at least one of Fire God Backwoods Savage's 10 Commandments . . . but on the flipside if I end up dropping a large round on my foot I promise to not take your name in vain or yell out "BACKWOODS SAVAGE!!!!!" as I wince from the pain. ;) :)
 
I also promise to not covet your stack of wood Dennis . . . although that commandment might be a little tougher if I wasn't ahead of the game myself. :)
 
Darn it . . . just realized I did break one other commandment . . . I made a graven image of Backwoods Savage out of wood ash and creosote. :)
 
Status
Not open for further replies.