pellet stove life expectancy?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

kurtmzulauf

New Member
I found myself in a heated conversation with coworkers and I did not have a clear cut answer to how long will my MT. vernon last? I have went to this stove as my primary heat source and was asked If the cost of the stove vs fuel oil and oilburner over the years will be a sound investment. I thought I went over these questions when I purchased but I guess I never really thought about that. My oil burner is eleven years old and still runs like new with only minor repairs. Will this stove last the test of time?
Kurt
 
Have my Whitfield now 13 years and had not added anything but some new firebrick this year, all depends on the manufacturer, buy a cheap home depot stove and you get what you pay for.... bust my ball's all you want Englander FanBoys!!
 
Pellet-King said:
Have my Whitfield now 13 years and had not added anything but some new firebrick this year, all depends on the manufacturer, buy a cheap home depot stove and you get what you pay for.... bust my ball's all you want Englander FanBoys!!

Wow impressive! Who manufactures your blowers?
 
There are many stoves out there that are 20 or so years old and still running. Pellet stoves are made up of numerous different components which can fail over time. However, those individual components can be replaced when they fail. So, your ignighter may only last for 5 years, but you replace it and get another 5 years out of it. I would think a stove could last as long as you want it to last, if you can still get replacement parts for it.
 
Dont know there factory,Fasco? never even oil them, and the stove runs 24/7 nonstop nov/arpril every year, Friend gave me a larger/longer fasco blower for a backup last spring, still sitting in my car trunk.
2 years ago cleaned the Convection blower squirrel cage for the first time, just saw it ws pretty loaded, blew hot air out no problem before i cleaned it.
 
Wood Nugget said:
There are many stoves out there that are 20 or so years old and still running. Pellet stoves are made up of numerous different components which can fail over time. However, those individual components can be replaced when they fail. So, your ignighter may only last for 5 years, but you replace it and get another 5 years out of it. I would think a stove could last as long as you want it to last, if you can still get replacement parts for it.

Bout sums it up... I got a 16 yr old Englander that needed a new auger and combustion blower. But runs like a top.....
 
IMHO. As long as I can get parts, my Whitfield will last until the firebox/heat exchanger rusts through. That could be near forever. All the Fasco motors are original - 14 years. I do oil them P-K. These will be replaceable for some time because many stoves use the same parts. I've replaced the firebrick once (this year) and the ignitor twice. If the control panel goes south, I'll go the Snowy route with it. I had to turn it down to idle today when the temp went from 7 to a balmy 22.
 
With proper care most stoves will last a long time.

An individual part maybe not so long.
 
Wow! You guys have igniters!? My kit Whitfield is 18 years old. according to the plaque in the hopper lid. I have no idea how old the individual parts are.

Dave
 
DneprDave said:
Wow! You guys have igniters!? My kit Whitfield is 18 years old. according to the plaque in the hopper lid. I have no idea how old the individual parts are.

Dave

Englanders ignitor is a blowtorch... So I guess I got one.. The other 2 have one. But they are 4 yrs old (Quad) and 2 yrs old (Fahrenheit).
 
kurtmzulauf said:
I found myself in a heated conversation with coworkers and I did not have a clear cut answer to how long will my MT. vernon last? I have went to this stove as my primary heat source and was asked If the cost of the stove vs fuel oil and oilburner over the years will be a sound investment. I thought I went over these questions when I purchased but I guess I never really thought about that. My oil burner is eleven years old and still runs like new with only minor repairs. Will this stove last the test of time?
Kurt

Hi Kurt

A good stove will last a minimum of 10 years. However if not taken care of then 3 years could be the max! Case in point the Enviro EF-2I I picked up was in rental property! It was taken out and replaced with a more automated gas furnace. The stove was sitting in a garage chock full of pellet dust, the cleaning rod was bent and the over fire safety switch completely blown! That means the stove was broken and no longer operative!! Also the body was scratched and the paint was warn, very warn and dull! Now Enviro has been making these stoves for 10 years, they are built like tanks!! I picked it up, completely repainted it even the metal fire brick inside. Installed a new over fire safety switch and straitened the cleaning rod and added a lock nut so it will not warble and bend. Also gave it a professional cleaning and replaced the exhaust blower gasket! Now it is working well in it's new non rental property in very good hands! So it will last another 10 years!!

Now as far as boilers go, my 22 year old Valliant was working well but it was not a cold start and had a tankless coil to heat the hot water!! Unfortunately some boiler companies have difficulty making newer up to date designs. I now have a new cold start boiler with an indirect water tank and a outdoor reset. This uses less than half the oil than my older 85% AFUE Valliant used. BTW AFUE efficiency just means that the smoke is as clean as it can be that is all. The old boiler had a 1.25 gallons per hour nozzle and the new boiler has a 0.65 gallon per hour nozzle!!

Anyway, even though the boiler had a 20 year guarantee it was not worth paying for double the amount of oil to feed the monster!!

The pellet stove I have, has a 7 year guarantee so maybe in theory it will not last as long but as we can see Whitfields 15 years older or more and others do last that long!

However there is another trend I see to computerize these pellet stoves. Now most have digital control panels instead of a few knobs on potentiometers. Some stoves like the Mt Vernon AE with the new data displaying thermostat with many error codes coming from more electronic sensors may have a greater tendency to fail. The optical sensor that senses the auger turning fails when dirty or even just quits. Also more plastic in the Mt Vernon AE hoppers may not be quite as strong as an all metal hopper. The plastic hopper design may be there so the Low Fuel sensor can operate. But really do we need a low fuel sensor??? I am not saying that these features will shorten the life of the stove if properly maintained but more maintenance and parts replacement may be required!

So, I am saying, the longevity of a pellet stove may depend upon how easy it is to get replacement parts, how long the stove is in production, especially if support is still there for it. Some people do believe a sturdy design and simplicity of the electronics do contribute to the longevity where support may be more difficult to get.
 
as long as places like Grainger , Hearth.com and others are around You can get blowers and augers for the next century or two.
 
I bought my Whitfield Advantage I a year and a half ago for $50. and left it outside but covered all through the summer and fall. Finally hauled it into the house last winter and set it up and the only maintenance it's needed was cleaning and oiling. I assume everything is original, but have no way of knowing. Anyway, it's a first generation stove. I recall that its serial number is lower than eight thousand so it was made in the early years, -the early eighties. It has no igniter or electronics so I don't have to replace those parts. The trade-off is that I have to light it manually, which I don't mind since I've never used a pellet stove before it.
 
I have a used Whitfield Advantage II-T. Stove MFG in 1995. I got it in 2007, it's used in just the winter months 24/7. All parts are original. 18 years old and running strong!!!
 
thanks for all the great responces, I imagine that if I keep up with my obsesive care of my mt. vernon ae then it could last forever! and I know that if it has a failure i just go down stairs a flick on the oil furnace as my back up until I get my stove repaired. So far I am very pleased with my quad Mt. Vernon AE and classic bay, I hope with proper regular maint and a little obsessivness with keeping things running smooth trhey will outlast me.
Thanks again.....Kurt
 
I should add that I had to replace the "fire brick" since it was falling apart but I reused the side pieces for the center and replaced them with two layers of cement siding that I cut to fit. It cost nothing as compared to the official stuff which might have cost $150. It didn't exist when the stove was made so they had to use the softer and more fragile substance. I don't know what the modern stuff is but it costs too much.
 
Status
Not open for further replies.