Service Manual for VistaFlame VF100?
- Thread starter madge69
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
tony58
Member
Here U Go---found it on google---
http://www.google.com/#sclient=psy-...w.,cf.osb&fp=dc9072f4d1d34f4c&biw=873&bih=567
http://www.google.com/#sclient=psy-...w.,cf.osb&fp=dc9072f4d1d34f4c&biw=873&bih=567
tony58 said:
Those are for the "owners manual".....the OP is looking for a "service manual"....different animal.
tony58
Member
Thanks for looking, guys. Mainly I'm interested if there's any info in there on feed rates and draft settings at different heat levels. Also, just the sequence of events in the operation of the stove. For example, I always thought that the combusion blower always operates at full speed, but that's definitely not the case as I can hear it change during shutdown and startup. Just want to make sure I'm getting as much heat value out of my pellets as I can. I think this stove is somewhat pellet picky and has a tendency to clinker with most pellets. I saw j mention that his Big E had a similar problem, so I'm wondering if my draft setting is too low. (I am using the high-ash burnpot, by the way).
Thanks for any help or suggestions as always!
Thanks for any help or suggestions as always!
- Status
Similar threads
