lopiliberty
Minister of Fire
QuadORLopi said:
The freedom bay same as my liberty will take a 16in log max N/S but it will be close to the glass. I keep them cut around 14 or 15in so there is more room between the glass and the air wash.
New to Inserts looking for advice
- Thread starter Prockncj
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
The freedom bay same as my liberty will take a 16in log max N/S but it will be close to the glass. I keep them cut around 14 or 15in so there is more room between the glass and the air wash.
MofoG23
Feeling the Heat
QuadORLopi said:
The airwash system works pretty good on Quads...as long as you are burning well seasoned wood and keep the stove at the correct burn temps.
The side windows on my 4100i usually stay clean.
amellefson
Member
QuadForLife said:
I have 19+" n/s but that is TIGHT to the glass. I cut at roughly 17" or 18". This way I can still fit a straggler that was too long.
Tony
amellefson
Member
MofoG23
Feeling the Heat
3 seasons with our unit....just did the "dollar bill test" yesterday since the weather warmed up. Passed the test with no issues - gaskets still in good condition.
Has anyone bought an insert/stove just a tad big for their room and gets to hot?
If so, can you get away with building a smaller fire in the box
To produce less heat.
I'm assuming this works out with the EPA system still?
If so, can you get away with building a smaller fire in the box
To produce less heat.
I'm assuming this works out with the EPA system still?
- Status
Similar threads
