I was wondering if anyone else is noticing what I have with the onset of a changed control board. Late last season I had to get my control board changed. At that time the tech said he would set it up to mimic the operation of the original board as I was used to hearing the stove in its various stages of running. He went about setting the dp switches accordingly. The stove has run fine ever since , however when it runs out of pellets it doesn't throw the 5 blink code like it used to. Now don't get me wrong, it is no big deal when I run out of pellets that the status light doesn't throw a code but I am kinda wondering if it will report other kinds of problems like it used to.
Lack of Harman P68 Status Blinks
- Thread starter jcataba
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
i would take a look at dip switch 5.......is it on or off? If the probe wires nearest the board are red, it needs to be on, if the probe wires are black, dipswitch 5 needs to be off.
exoilburner
Feeling the Heat
76brian
Feeling the Heat
Come to think of it, I have let my P43 run 'till empty several times and have never seen the 5 blink status... everything else seems to be fine though.
PJPellet
Minister of Fire
I have been following this thread with interest. Here are my observations about my P 43. When new in February I got the blinks when the stove would run out of fuel. This morning I let it run out of fuel again and now I get no blinks. So I find this odd and wanted to post it here. If I get blinks again in the future i will post back. Not sure why sometimes it blinks and sometimes it does not.
I don't get the "5 Blink" with either of my
Harmans when they run out of pellets.
Never have...I just fill the hopper, turn
the Stove/Room Temp to "OFF" for a sec
& then reset to the normal position...
Harmans when they run out of pellets.
Never have...I just fill the hopper, turn
the Stove/Room Temp to "OFF" for a sec
& then reset to the normal position...
- Status
Similar threads
