Had a power outage and ever since the stove has low flame and low heat output. Anybody know what mode this stove should be in? It currently is set to mode A.
Bottom 3 numbers are 6-4-1.
Bottom 3 numbers are 6-4-1.
55-SPH22L Mode Setting??
- Thread starter lvsb
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
read a post on the forum, same stove set to mode C. Trying that setting now so far seems better but with probally need to contact tech support. Seems evry time I lose power it reverts back to A mode
stoveguy2esw
Minister of Fire
lvsb said:
i just sent you a PM, set in mode C , power failures usually do not cause mode jumping but occasionally do, let me know how it does back in mode C
to set mode, unplug, replug push blower up and down arrows quickly and release, then adjust the mode using the heat range up or down arrows (you only have a bout 5 seconds after bring it up so if you do not get there in time unplug and repeat
Mike,
Stove is running GREAT in mode C!! Thank you for validating the settings.
I even got the T-stat working today.
Thanks again!
Stove is running GREAT in mode C!! Thank you for validating the settings.
I even got the T-stat working today.
Thanks again!
- Status
Similar threads
