Enviro M55 owners -

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
chanlon1974

chanlon1974

Member
Nov 15, 2008
148
CT
I'm looking for the 1/8" hole to take a reading from the stove with a magnahelic gauge. The manual says it on the right side of the pedestal, but this stove is not on a pedestal. I called my dealer and he said he would have to make a phone call as he has never been able to find it either. Does anyone know where this thing is!!?
 
on my m55 cast free standing its on the right side of the ash box as you looking from the front of the stove
 
francis.g said:
on my m55 cast free standing its on the right side of the ash box as you looking from the front of the stove
Click to expand...

Found it! Thanks. I have 4 other holes in the side of the ash box from where the brackets that attached the stove to the pallet were screwed in. I probably should have saved those and screwed them back in
 
Yes you should have put those screws back in, I do not remember if it was the direction's that stated that or if it was on the shipping bracket that you removed
 
cletus said:
Yes you should have put those screws back in, I do not remember if it was the direction's that stated that or if it was on the shipping bracket that you removed
Click to expand...
Yeah, either way I missed it. I'll have to find some that fit and replace them.
 
Put some duct tape over them until I can get to the hardware store tomorrow. Took my reading on level three and I'm at .20. Stove seems good there
 
make sure you do put those bolts back in the holes. I do not know why but the dealer told me when I unbolted the pallet from the stove it is critical to put those bolts back in. I Imagine you would get a leak from the ash dwarer.
 
Brokenwing said:
make sure you do put those bolts back in the holes. I do not know why but the dealer told me when I unbolted the pallet from the stove it is critical to put those bolts back in. I Imagine you would get a leak from the ash dwarer.
Click to expand...

Yeah I am assuming it would affect the pressure in the ash box. I can't believe I missed putting those bolts back in! Oh well mistakes happen. At least I caught it.
 
Status
Not open for further replies.

Similar threads

T
Enviro M55 Thermostat Causes #4 Error
Replies
5
Views
203
The Pellet Mill - Pellet and Multifuel Stoves
DevinM88
DevinM88
J
Help: New Sante Fe Quadrafire issues list
Replies
0
Views
320
The Pellet Mill - Pellet and Multifuel Stoves
jcouncil
J
J
Need Help with Enviro M55 and Thermostat
Replies
2
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
Thechezman
T
Tim M.
Enviro M55 Owners
Replies
7
Views
2K
The Pellet Mill - Pellet and Multifuel Stoves
Mt Bob
Mt Bob
E
VistaFlame VF55 Igniter Burnout
Replies
3
Views
705
The Pellet Mill - Pellet and Multifuel Stoves
johneh
johneh
Top Bottom
Back