D
DexterDay
Guest
I went to my buddies house and started cutting all his dead Ash Trees, but I had to take quite a few of the "Thorn Bush" trees as an exception.
It seems like its a good hard wood. It took almost 7 of these trees to get a decent truckload. They were about 20' tall, and only around 10' of good trunk (some less than that). Nothing that a 16" bar couldn't handle. With most being about 10"-12" in diameter.
Has anyone burned this stuff before? Is it a decent wood? I spent quite a bit of time knocking 90% of the 3"-6" thorns off the trunk. Took all day to get this load...
A pretty Orange colored wood, that smelled good, w/ a lighter heartwood....
It seems like its a good hard wood. It took almost 7 of these trees to get a decent truckload. They were about 20' tall, and only around 10' of good trunk (some less than that). Nothing that a 16" bar couldn't handle. With most being about 10"-12" in diameter.
Has anyone burned this stuff before? Is it a decent wood? I spent quite a bit of time knocking 90% of the 3"-6" thorns off the trunk. Took all day to get this load...
A pretty Orange colored wood, that smelled good, w/ a lighter heartwood....