Hello All,
I am the proud new owner of an Atlantic Kitchen Heater Model 121. It is in rough shape but I plan to restore it to functional status and use it. Here is a link to a gallery with pictures:
http://s1125.photobucket.com/albums/l581/nateFARMgeek/Atlantic Kitchen Heater Model 121/
I have two issues. The first is I can't seem to find a compatible grate shaker handle. The stove has a "DOCKASH-Triangle Grate" and the end of the grates are four sided but NOT square, more like a diamond, about 3/4" or so in diameter. Most ebay listings have square ends. Should I be looking in a stove shop?
2nd issue is the draft selector is broken. In the back on the smoke box there is a lever that moves the draft damper. This lever was connected to a rod that goes through the stove from back to front and is connected to a draft selector on the front of the unit. Somehow the lever on the back sheared off and I can't seem to figure out how it was connected to the rod. See pics. Can I weld a new section of lever on the broken one?
Any help would be appreciated!
Nate
I am the proud new owner of an Atlantic Kitchen Heater Model 121. It is in rough shape but I plan to restore it to functional status and use it. Here is a link to a gallery with pictures:
http://s1125.photobucket.com/albums/l581/nateFARMgeek/Atlantic Kitchen Heater Model 121/
I have two issues. The first is I can't seem to find a compatible grate shaker handle. The stove has a "DOCKASH-Triangle Grate" and the end of the grates are four sided but NOT square, more like a diamond, about 3/4" or so in diameter. Most ebay listings have square ends. Should I be looking in a stove shop?
2nd issue is the draft selector is broken. In the back on the smoke box there is a lever that moves the draft damper. This lever was connected to a rod that goes through the stove from back to front and is connected to a draft selector on the front of the unit. Somehow the lever on the back sheared off and I can't seem to figure out how it was connected to the rod. See pics. Can I weld a new section of lever on the broken one?
Any help would be appreciated!
Nate