Wood ID....good ending ???

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Beer Belly

Minister of Fire
Oct 26, 2011
2,232
Connecticut
Yesterday my brother calls me.....free wood, friend moving, gotta be good wood, friend wouldn't buy junk....got a truck load of Scotch Pine<> ....not happy, but I can use it in the firepit. Buddy stops over, saw some wood on the side of the road, we go for a ride, and grab a load....here it is, I'm thinking (hoping) something in the Oak family....it did have some wieght to it.....it would be a great end, to an otherwise wasted day of scrounging
DSCN2269.jpg


DSCN2271.jpg
 
grain looks like oak
 
About 10 rounds like that about 100 yards from my driveway that someone threw out, I stopped and split one to see what it was. If its still there next month I may bring it home.

We must have that Pine Myth thing.
 
About 10 rounds like that about 100 yards from my driveway that someone threw out, I stopped and split one to see what it was. If its still there next month I may bring it home.

We must have that Pine Myth thing.
I just don't care for Pine in the stove, so I use it for the outdoor fires
 
I am not sure what it is, but I am pretty sure it isn't oak. The bark and white wood make we think maybe Ash.
 
I just don't care for Pine in the stove, so I use it for the outdoor fires
I use it outdoor, too. Nice, lively fire! But I also use it for starting top-down in the stove. I've got kindling that I split anywhere from fairly small to very small, and if I had to I could start a fire with just a match.
I am not sure what it is, but I am pretty sure it isn't oak. The bark and white wood make we think maybe Ash.
Yeah, the split looks like it could be ash. The round, bark and end grain, doesn't look quite right...but it's most likely Ash. Maybe just not the White Ash that I usually see...
 
my vote is poplar, doesn't appear to be the right grain or color for ash, any chance there were any pieces that had leaves still
 
Tulip poplar. Fo' sho'.
 
  • Like
Reactions: ScotO
its gonna burn good once its c/s/s for a year
 
Green tint in the center! Poppy............aka tulip.
 
  • Like
Reactions: ScotO
Guess it's Poplar......not the best find, but I'll likely use it for the shoulder season, or firepit once it's seasoned
 
  • Like
Reactions: ScotO
Yessir, that looks like tulip poplar to me! Definitely not oak. Burns super fast, lots of ash. I won't burn it, takes up too much valuable space in the stacks. But its free, if you have the space go for it...
 
Guess it's Poplar......not the best find, but I'll likely use it for the shoulder season, or firepit once it's seasoned

Its pretty good milling wood fun to watch the chips fly and makes a good board.
 
Poplar isn't the best but far from the worst for burning. Jay is right...makes good milling stock...easy to find big straight trees.
 
  • Like
Reactions: ScotO
I would trade all the Aspen/Popp/Cottonwood straight up for any wood except basswood.

Yup, that includes Pine. After you got the Pine processed, you shoulda' got a cold one and forgot about the Popp ;hm
 
  • Like
Reactions: Backwoods Savage
I would trade all the Aspen/Popp/Cottonwood straight up for any wood except basswood.

Yup, that includes Pine. After you got the Pine processed, you shoulda' got a cold one and forgot about the Popp ;hm

Tulip poplar is a different critter than the "poplar" you folks up there are used to.
 
We just milled a chitload of tulip poplar a couple weeks ago.......had 12 nice logs total, they were destined to end up in my buddy's OWB pile. They were just TOO nice to do that to, so they went to my other buddy's mill. Now half of them are stacked in my garage, the other half I gave away. Lotsa nice boards in them logs.....

From the two trees you can see in this pic (one in the background is around 100', the one in the front is 90')......

2012-05-27_07-14-05_363.jpg

to logs (12 of them total)

2012-05-27_07-30-12_511.jpg 2012-06-02_09-48-49_594.jpg

To the mill.......

2012-08-17_08-08-02_257.jpg2012-08-17_09-20-02_199.jpg2012-08-17_09-25-17_99.jpg

to boards!!

2012-08-17_12-28-46_522.jpg2012-08-17_20-27-16_859.jpg2012-08-19_19-08-18_158.jpg

If you have the means to save otherwise "junk" wood, try to do it. These boards will end up as country benches, crafts, and even shelves for my garage eventually. All for some hard work, and a gallon of my homemade maple syrup (my buddy wouldn't take payment for the millwork, so I am giving him a gallon of syrup)......
 
you've got lots of building projects ahead of you now!!
 
Nice pics Scotty. Pretty cool how you go from standing timber to boards drying in your garage.:cool:
It's neat to do, I've always wanted to (been cutting for YEARS now), just never did it. My one buddy finally fixed up his big roundblade mill, and we're in business! Got lots of logs to cut down this fall and winter (a couple Kentucky coffeetrees, a huge ash tree, a monster (I mean a MONSTER) pine tree (will save those boards for the long-awaited woodshed/sugar shack). I'm excited to get this living room project done so I can get cutting again! Anyway, sorry for the hijack, BeerBelly. Back to the original post, if the poplar is already bucked up, and you have the space for it, might as well split it up, stack it up, and burn it......
 
  • Like
Reactions: Dave_B
Status
Not open for further replies.