Gilson screw-drive wood splitter: $150

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

HeatsTwice

Minister of Fire
Jan 7, 2008
592
Santa Rosa, California
Ran across this today. First time I ever saw a screw drive splitter. It probably has a very long cycle time. I couldn't even find refernce to this make in a google search:

http://sfbay.craigslist.org/nby/grd/3171119575.html
Older Gilson screw-drive wood splitter. B & S motor, though can't tell what the horsepower is. Guessing 8+ HP based on the size. Ran well 7-8 years ago when I had a friend go through the motor and get it running. Hasn't been used since. Has been stored outside, though the motor has always been covered. Uses 1 7/8" ball and one tire has small leak. $150 firm.
 

Attachments

  • SplitterGilsonScrewDrive.1.jpg
    SplitterGilsonScrewDrive.1.jpg
    41.2 KB · Views: 1,446
  • SplitterGilsonScrewDrive.2.jpg
    SplitterGilsonScrewDrive.2.jpg
    62.4 KB · Views: 2,225
  • SplitterGilsonScrewDrive.3.jpg
    SplitterGilsonScrewDrive.3.jpg
    45.9 KB · Views: 1,244
yeah, that baby there is probably really slow. Not sure, I honestly have never seen one before.
 
You could probably put on a piece of wood to split, go cook dinner and come back and take it off.......
 
  • Like
Reactions: Backwoods Savage
I'd be curious to see that thing work. I'm guessing slow as well, but it might be neat to run once. A C
 
Actually it could possibly be just as fast or faster than a hydraulic. The adjustable stroke and auto-return intrigue me and Gilson was not known for making junk back in the day. (Though I bet this machine was built when I was wettin' Huggies...) For $150 I'd have to give it a shot.....

Hell, if it turned out to be a turd it's a prime candidate for conversion to hydraulic power. For $150 it's got tires, a beam and a wedge already. Oh yeah, there's a sweet old-school Briggs on it too....
 
  • Like
Reactions: Jags
It doesn't have to be slow. Gears do wonderful things.
 
It doesn't have to be slow. Gears do wonderful things.

I bought it. I had one just like this years ago and it worked great. Not slow at all, only probs I had with it was the reverse was finiky and I had to replace the rubber wheel that reverses the screw a couple times. Lampson tractor in Ukiah was able to find parts for it. They told me it was actually made by Ford Tractor.
On this one I looks like soemone has moved the mounting location of the motor (not sure why) so the pulleys no longer line up. The drive mechinisim all seems to be working fine when I turn it by hand. Motor does not have any spark and carb looks messed up. Just going to replace it with a harbor freight 6.5 hp motor and remount it so the pulleys line up. When its all done Ill repost how it turned out.
 
  • Like
Reactions: n6crv
No spark most likely can be cured by filing the oints and resetting the gap. Common on these old motors that sit awhile. Clean that carb out and you may have it going for next to nothing. ;)
 
After messing with the motor it still would not start. I decided to go with a 6.5 hp motor form Harbor Freight $109 well spent as it starts easily and has plenty of power.Here is a short vid of it running.
 
  • Like
Reactions: n6crv
Look at it this way, you have a wood splitter that works for you, and you only have 300 bucks and a little work into it. I think you did alright!
 
Is there a way to stop the reverse (or even forward) so you don't have to use the entire stroke? If so, that would speed up thing nicely and would be less wear and tear.
 
  • Like
Reactions: n6crv
Then the process could be sped up a lot. Using the full range really would make this one slow.
 
I wanna see more video. That was cooool!
 
Where can I find a wheel that will work on the reverse on this log splitter? And what is the part number? I have recently purchased one on cl houston and cant seem to get reverse to work.
 
Here's a video off utube.
 
Where can I find a wheel that will work on the reverse on this log splitter? And what is the part number? I have recently purchased one on cl houston and cant seem to get reverse to work.

Maybe post a pic of what you are looking for and where it is located on the machine. Most people have never even seen the working components of one of these things.

I did find this, but it is in ref to the Gilson snowblowers. They do state that some parts are re-manufactured stuff. Maybe they could come up with something for you:
http://www.gilsonsnowblowers.com/snowparts.html
 
Status
Not open for further replies.