No oiling ports on the dist. blower motor? Sounds like it might just need a lube.Well i got it to stop vibrating, but after running about 10 mins it starts slowing down and makes a awful humming noise. Think the little motor is calling it quits.....going to keep that new unit coming. I will know in the future about the bushing.....thanks for the Tip.
Austroflamm model ?
- Thread starter bwep
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Nothing to lube. Looks like the stator is moving back and forth causing it to move out of the magnet that surrounds it......when i put everything back together i might have done something wrong...... there were alot of spacers,bushing and little washers......ooops
.
Mr Whitfield
Feeling the Heat
Oh.....no.....so it's not a Integra. Yikes..... hope the blower motors are the same just ordered one thinking this was a Integra
mayhem
Minister of Fire
Looks just like the Integra that I just got. The model name and mfr date are almost hidden on the info sheet inside the hopper cover. It has a bunch of operating info in there and right smack in the middle is the model name, mfr date and serial number.
Unfortunately, that sticker is not on mine. I ordered the blower motor for a Integra and it was the correct part. I'm going with it's a Integra
SmokeyTheBear
Minister of Fire
It is working great
The auto ignition works perfect after replacement of the ignitor.The fan was a little noisey so i replaced it. I have burned 5 bags so far without any problems. Thanks again to all that helped me out
SmokeyTheBear
Minister of Fire
- Status
Similar threads
