M55 Thermostat hook-up

Ok HVAC guys.

I have an old Honeywell (Magic) 5-2 programmable CT3200A1001 Thermostat on my Oil Furnace.
I don't use it except to turn the furnace on and off a couple of times a year in a pellet emergency.

Could I use it as my M55 Thermostat and use the LUX PSM30SA that came with the stove on the oil system?

In other words swap them.

I'm not above buying a new thermostat but being and old thrifty (read cheap) Yankee, why.

Both systems are 24volt.
Here is a link to the Honeywell manual.
http://www.honeywellcentral.com/product/magic-stat-5-2-day-programmable-thermostat-ct3200a

Oil system only uses 2 wires R and W.

What do you think?
---Nailer---

Thanks Guys,

I'll get the LUX next time I go by a Lowes.

Stove is awesome. Its 32 deg outside with a 10 MPH north wind.

Have the stove on level #2 for last hour and it is 71 throughout the house.
Had it on #1 most of the day but the living room cooled all the way down to 69 when the sun went down. Yikes!

Gonna clean it tomorrow and see how bad the Maine's Choice ash is.
They are burning fine but definitely a shoulder pellet.

We just marched in a Christmas parade with the Cub Scouts. Nice to come home to a warm house

---Nailer---

Ok,

Picked up and installed a LUX TX-500U Programmable Thermostat.
http://www.lowes.com/pd_24531-37422...s?Ntt=lux+programmable+thermostat&facetInfo;=

Wanted the TX-500E but it was not in stock.

Easy hookup and has been running since yesterday afternoon.

Warn outside but judging by the still 1/2 full hopper It has saved me at least 30% of pellets overnight.
VS. running in manual mode 2 all night.

Have it set for daytime temp of 68 in my kitchen (next room to stove). Stove room is at 72
Set sleep temp at 62 and allowed it 2 hours to warm house before wake up.

House feels more evenly heated (as it should be)

Thanks everyone for the suggestions.

---Nailer---