Hat's of to you all, this site, and thanks for the tips

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Wow looking at that log weight chart makes me wonder how I haven't slipped a disc or done other long term damage to my back. I've dead lifted rounds heavier than I am because of my firewood sickness. Now I Noodle anything over 24" in diameter to save the week of hobbling around after a good scrounge.
 
I'll usually halve or quarter the big stuff with the maul. If I can't pop it after a couple whacks I'll noodle it.
 
  • Like
Reactions: OldLumberKid
Bet the one you showed will split into some nice splits when green, with out a huge effort. Guessing ash ?
I always saved some gnarly- knotty un-splitable round for my splitting block, cut it at a little angle about 10 to 12" tall for my height ;)

I came back to this to add a bunch of "likes" I missed the first time round as a rookie here, and to say that 103# 16" round that was/is my chopping block — well it was like concrete when I laid the Fiskars to it last week. Guess over time it got harder or something! Still almost too purdy a piece of wood to split.

That other block hasn't shown up yet, but it might soon.



Noodle = Cut lengthwise. You cut the round growth rings into semicircles. In many species it produces thin "noodles" of wood. Fact # 237 I learned here.:)


Had no idea what that was back when I joined.

A despicable practice. :)

But now, well ... a chainsaw's gotta have some fun sometimes!
 
I figure besides all of the info I have learned here this site has saved me $1,000 or more. I found out I needed a liner for my stove to reach its full potential. After reading a bunch of insert install threads with lots of pics of busted out dampers etc. I realized I could do it myself. Hard nasty work but got done with the virtual help of the great people here. Nothing like doing something new yourself and knowing it is done right. Thanks to all.
 
I have found that my recently home made hookaroon works great for dragging chunks over to the splitter, and I picked up materials to make a long one for pulling wood out of the trailer, it might even work to drag chunks up the trailer ramp, but that remains to be tried.
There is nothing wrong with using these kinds of tools to work smarter.

Home Made hookaroon ,I just had to go and make my own hookaroon




IMG_20130312_024607.jpg
 
Never have weighed them but judging by the 50lb box I mailed at the post office (I was guessing it was 20-25lbs) and that chart I have picked up a few that were probably 150+lbs. Back before I broke my back I would lug 2 20mm ammo cans from the pallet to where we were loading it, they are a bit over 150lbs each. Looking back wasn't exactly smart. We were supposed to have 2 person lift for even 1 can. :rolleyes:

One thing is still bugging me — how often do you guys find yourselves deadlifting 100-lb plus logs from site to truck and truck to home sawing site? At what log weight do you enlist the help of whomever you can in moving logs ;)
View attachment 82610 View attachment 82611
I was curious, this 16" diameter log section (currently serving as my chopping block) seemed a lot heavier than my 71# Labrador Retriever-collie mix. And sure enough the scales say it's half my weight. Wowzer! So ... how do you folks manage lugging these 100#+ logs around from site to truck and truck to yard?
 
Status
Not open for further replies.