Straight out 3" vent less than 4' horizontal with no downslope correct?
You also had clinker issues with your other stoves.
First thing I'd do is see if there are any air leaks check all areas of the fire box for bent seams, loose bolts, and so forth. Seal and tighten .
Does your hopper have a gasket? If so test that.
Then I'd start seriously considering an OAK.
Is this stove on a lower level in the house?
Are there any fireplaces, or other heating devices that are power ventilated or use a chimney?
I'll take a look int the manual to see if I can find anything that might be a logical place to have air leaks. But that won't be tonight.
You also had clinker issues with your other stoves.
First thing I'd do is see if there are any air leaks check all areas of the fire box for bent seams, loose bolts, and so forth. Seal and tighten .
Does your hopper have a gasket? If so test that.
Then I'd start seriously considering an OAK.
Is this stove on a lower level in the house?
Are there any fireplaces, or other heating devices that are power ventilated or use a chimney?
I'll take a look int the manual to see if I can find anything that might be a logical place to have air leaks. But that won't be tonight.