A contest for the fun of it

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
wow looking at those long pellets makes me feel inadequate, doesn't girth count too?
 
Wouldn't burn that in the stove!

No but what I used to burn it in had some stove like parts .;)

A small burn pot.
An exhaust pipe where the smoke was removed.
A small hole to introduce secondary air into the burn.
 
  • Like
Reactions: DexterDay
Well, I don't know if this one qualifies, it has been exposed to water, and I didn't have a tape on me when I ran across it on the shore. Musta fell off somebody's truck while they was goin' acrost the bridge, I guess .................. Still workin' on gittin' it winched up over the bank, if I kin git 'er up, I'll see if the ol' St. Croix will burn 'er...........

P1070092-001.JPG
 
I save a little sample from every new brand and even different years.

The vintage 2010 AWF were the looong ones. Since then, they have all been short and this year they are a fantastic pellet. Short, hot, clean..

I also save a Bag from each brand. I am up to almost 20 different brands.

These are all different brands. I have other samples, but they are year to year of these brands to compare. But I aldo measure heat with a Cole Parmer K-type thermocouple and stack my pellets with a laser line and plumb. ;)
Jotting everything down in a notebook, along with usage (fuel and electric).!!!


View attachment 86119 View attachment 86120
Dude you stack everything perfect dont you?

Can't say I'm too far off, but you really take the cake. It's not a bad thing.
 
My entry is MOAP (Mother Of All Pellets). Here she is, all 3.75 inches of her. Pennington produced MOAP.
 

Attachments

  • MOAP2.jpg
    MOAP2.jpg
    80.1 KB · Views: 118
  • MOAP1.jpg
    MOAP1.jpg
    94.9 KB · Views: 300
  • Like
Reactions: thedude110
My entry is MOAP (Mother Of All Pellets). Here she is, all 3.75 inches of her. Pennington produced MOAP.
Not surprised its a Pennington. Most pellets in the bag are mini drinking straws.

Had a couple I know were 3.75. But my 29 month son knocked them off the window sill and half sized them.
 
Well, I don't know if this one qualifies, it has been exposed to water, and I didn't have a tape on me when I ran across it on the shore. Musta fell off somebody's truck while they was goin' acrost the bridge, I guess .................. Still workin' on gittin' it winched up over the bank, if I kin git 'er up, I'll see if the ol' St. Croix will burn 'er...........

View attachment 86279
LoL....If that's your pellet. You absolutely have to post a pic of your stove.

I bet you can heat a small town with that baby.
 
  • Like
Reactions: DexterDay
it to me a while but I found it ...lookin like 4.5 inches!!
 

Attachments

  • pellet contest 003.JPG
    pellet contest 003.JPG
    67.8 KB · Views: 154
Well, I don't know if this one qualifies, it has been exposed to water, and I didn't have a tape on me when I ran across it on the shore. Musta fell off somebody's truck while they was goin' acrost the bridge, I guess .................. Still workin' on gittin' it winched up over the bank, if I kin git 'er up, I'll see if the ol' St. Croix will burn 'er...........

View attachment 86279


OH < MY < GAWD! thats the single funniest post ive seen since ive been in here! i gotta go pee!!
 
it to me a while but I found it ...lookin like 4.5 inches!!

Well, looks like I'm going to have to change the name of mine to DOAP: Daughter of All Pellets. I tip my cap to you sir, finder of the true MOAP.
 
Woah..we bow to your "greatness"
 

Attachments

  • turmans2.JPG
    turmans2.JPG
    21.2 KB · Views: 117
UPDATE...winner has choice of a 1968 kennedy half (still a silver coin...40%)or the dime.(pre 1964) for the longest pellet.The remaining coin will go to an entrant chosen by picking from a bowl...all remaining names. This is in an effort lo let everyone hane a chance no matter how short your pellet is..._g Contest will run through to january 1st (dec 31 @ 12;00 EST) rules are as follows...post a picture of the longest pellet next to a inch scale tape. No gluing , tapeing or any other method of making pellet longer then it came out of the bag. to judge I think you guys should be the judge by votes to keep it totally fair. judging will be from the first through the third of january. all ties if any will be broken by post date of original pic posting of pellet ...oldest post wins. Lucky winner will be mailed coin by january 10, 2013. I've seen this done on other forums and it can be much fun. lets have some fun with this....:) Please point out any potential flaws in this contest so they can be addressed

Aaaaaaaaaaaannnnnnnnnnnnnnnnnnnnnnnnnnddddddddddddddddddddddddddddddddd ......................... the winner is ................................................?
 
I save a little sample from every new brand and even different years.

The vintage 2010 AWF were the looong ones. Since then, they have all been short and this year they are a fantastic pellet. Short, hot, clean..

I also save a Bag from each brand. I am up to almost 20 different brands.



These are all different brands. I have other samples, but they are year to year of these brands to compare. But I aldo measure heat with a Cole Parmer K-type thermocouple and stack my pellets with a laser line and plumb. ;)
Jotting everything down in a notebook, along with usage (fuel and electric).!!!


View attachment 86119 View attachment 86120



Seek professional help!
 
  • Like
Reactions: DexterDay
Aaaaaaaaaaaannnnnnnnnnnnnnnnnnnnnnnnnnddddddddddddddddddddddddddddddddd ......................... the winner is ................................................?

richg wins first place his choice
rparker won the drawing
harman man cheated_g
 
  • Like
Reactions: DexterDay
This is the best I can come up with. Just dumped in a bag of AWF I bought last year and these two popped up. I saw another one fly by but I wasn't quick enough to grab it before it disappeared.

Let the 2 inch jokes begin.

EDIT: then I realize the contest is over. Whoops.

ImageUploadedByTapatalk1357265401.068877.jpg
 
  • Like
Reactions: DexterDay
jeez guys,... my gf already thinks I have issues just being on a pellet forum,......if she finds out we're comparing the lengths of our pellets,....holy crap!!!!!!!
 
I save a little sample from every new brand and even different years.

The vintage 2010 AWF were the looong ones. Since then, they have all been short and this year they are a fantastic pellet. Short, hot, clean..

I also save a Bag from each brand. I am up to almost 20 different brands.

These are all different brands. I have other samples, but they are year to year of these brands to compare. But I aldo measure heat with a Cole Parmer K-type thermocouple and stack my pellets with a laser line and plumb. ;)
Jotting everything down in a notebook, along with usage (fuel and electric).!!!


View attachment 86119 View attachment 86120

How much for a dime bag of the ones with the purple threads on the left??
 
Isn't that what this place is?? Or have I been fooled again? :)



You have been fooled again, the enablers on this site are sicker than the addicts
 
Got my shiney "old" dime today...thanks Iceguy. Just gotta figure how to make a medallion and mount on the Quad.
 
Got my shiney "old" dime today...thanks Iceguy. Just gotta figure how to make a medallion and mount on the Quad.
My entry is MOAP (Mother Of All Pellets). Here she is, all 3.75 inches of her. Pennington produced MOAP.

Richg is everything OK? I have an extra dime so you still have your choice. Please send your address and choice so I can wind this up.. Also since harman man cheated you still have the "mother of ALL pellets"
 
Status
Not open for further replies.