The auger intermittently stops feeding the stove and therefore the stove burns what is left in the pot and then shuts down. You can hear the stove running as it does when it's run out of pellets but there are pellets in the box - they just aren't dropping down. Is the auger defective? Any help would be greatly appreciated!
Harman P38 keeps shutting down
- Thread starter rhschumaker
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
will711
Minister of Fire
Start with the simple 1st and go from there Check to see if some long pellets may have bridged not allowing the rest to drop.
theres alot of reasons it can not feed, but the above suggestions are great places to start. Long pellets can bridge your hopper opening......so can a clump, or too many fines! Have you cleaned out the fines chamber in the rear of the stove? Gummy stove syndrome? Your ESP probe clean?
Cleaned it, etc. did all of the above. Intermittently the feed motor light will shut off and won't come back on and the stove won't drop pellets until I turn the stove off and then turn it back on again. I'm stuck. Suggestions?
how old is your unit? has to be fairly recent if it has a feed motor light (IE: new P38 series- the old ones only has 2 knobs)....Im guessing less than 2 years old? Still under warrantee? Faulty board possibly.....also, a good thing with the new boards is your local, debonaire (sp?) hrman Dealer can hook up their DDm to it...something the "old" p38's couldnt do.
Im sure you know that the feed motor light isnt supposed to be on all the time, but does only come on intermittently.
Your P38 shouldnt shut down on its own under normal operating conditions unless it runs out of pellets......
Im sure you know that the feed motor light isnt supposed to be on all the time, but does only come on intermittently.
Your P38 shouldnt shut down on its own under normal operating conditions unless it runs out of pellets......
Thats what my husband is guessing is that it's a faulty board. Only a year old. Electrical covered for three years but still have to pay the $175 to have them come diagnose.
so, let me get this right.....the dealer coming out to service your still-under-warranty stove, the dealer who originally sold the unit to you, I assume, charges $175 to come out and diagnose the unit?! 
agreed.....unless its not the original selling dealer. Ive heard stories of some dealers doing this......they sell the unit, even if its under warranty, they charge an outrageous amount to come out......cant say I support this viewpoint....wow.....
Yeah, can't keep the stove running. And, yep, original dealer. I was surprised to be charged as well.
Bioburner
Moderator
- Status
Similar threads
