I don't see a 1-blink status listed in my manual. It went out on me yesterday and that's what I got. It fired right back up, but this morning I see I have 1 blink again. All looks well (just cleaned thoroughly Wed.), pellets dropping, seals good, etc. Anybody else ever see this?
Breckwell big E 1-blink status?
- Thread starter outdoorsgriz
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
buildingmaint
Feeling the Heat
Hello , I have a Breckwell Big E also, my owners Manual doesn't have anything on a #1 blinking either, are you sure it is a #1 and not a #2? How are you running it ? High /Low , On /Off with a Stat? Or just on manual? Mine will go out and turn off on the lowest setting [ High/Low], damper open too far, Eric from Kinsman stoves is a real good guy,and a regular on this forum, and is good at diagnosing Breckwell problems, let us know what you find out.
Having seen the three blank status before, this is a one blink. I've got it set up per book for using a thermostat - bought it and started using it first part of Nov. and had to redo the seals about a week later, but it's been running fine since.
Well, I turned it back on this morning and it's still running. I asked my wife to check it mid-day - she said it had a hearty flame (good pellets)...so I don't know what it's issue is/was. I'll check it again in awhile. Happy New Year to everyone.
Rick
Rick
....and apparently, I spoke too soon. Went out to shop this morning and no fire and one-blink status. Again, it fired right back up - good flame, good pellet feed, everything looks good.
kinsmanstoves
Minister of Fire
It is in High/Low mode with the thermostat hooked up. I have thermostat set to 65 and it's never gotten that warm as it is 1500 sq. ft. quonset style. I did double-check to make sure the wires on thermostat are still connected to control unit...and maybe the thermostat is malfunctioning. I had a similar situation happen on a Harman pf-100 pellet furnace once and problem went away when when I changed out the thermostat.
kinsmanstoves
Minister of Fire
- Status
Similar threads
