First I'd like to say that I'm new to the board. I live in upstate ny and have 4 dealers within a 75 mile radius. I cannot get anyone to service my old pellet pro 2. This stove was bought new by my parents in the early 90's. I acquired it a few months ago and am having nothing but issues. It was cleaned before my mom passed it to me but it did sit for a couple years after the cleaning.
The start of my problems:
I woke up to the stove being out. So while it was out I cleaned it and restarted it. Set the stove temp dial to 4 and turned the auger feed 5 turns out(per directions). The auger would feed continuously feeding the burning pellets and unburnt pellets into the ash pan. I turned the stove temp dial all the way down and the auger feed all the way in. The feed was still continuous.
I was told that it was the ESP probe from 2 out of the 3 dealers. I ordered a new probe. Installed it last week. Yesterday I woke up to a chilly house. The stove was out again. So I restarted it and went about my day. It ran great all day and last night. Today about 3:00pm it went out again. There wasn't any unburnt pellets in the burn pot so it's acting like the auger wasn't feeding.
I cleaned the stove again and restarted it. Now I'm right back to where I was before. The auger is running continuously again
Any suggestions???
Thank you in advance
The start of my problems:
I woke up to the stove being out. So while it was out I cleaned it and restarted it. Set the stove temp dial to 4 and turned the auger feed 5 turns out(per directions). The auger would feed continuously feeding the burning pellets and unburnt pellets into the ash pan. I turned the stove temp dial all the way down and the auger feed all the way in. The feed was still continuous.
I was told that it was the ESP probe from 2 out of the 3 dealers. I ordered a new probe. Installed it last week. Yesterday I woke up to a chilly house. The stove was out again. So I restarted it and went about my day. It ran great all day and last night. Today about 3:00pm it went out again. There wasn't any unburnt pellets in the burn pot so it's acting like the auger wasn't feeding.
I cleaned the stove again and restarted it. Now I'm right back to where I was before. The auger is running continuously again
Any suggestions???
Thank you in advance
