Help me please! My fault light comes on every half an hour

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Make sure to check and see if the bolts that hold the blower in the stove are still there.....or give dealer a call and make sure he has replacements if you do need them.
 
Make sure to check and see if the bolts that hold the blower in the stove are still there.....or give dealer a call and make sure he has replacements if you do need them.[/qu

Make sure to check and see if the bolts that hold the blower in the stove are still there.....or give dealer a call and make sure he has replacements if you do need them.
Some of bolts are missing so I will be sure to ask for them. What concerns me is how to put it in, and is there any thing else missing.
 
You also want the anti vibration gasket that goes between the blower flange and the heat exchanger.
 
You also want the anti vibration gasket that goes between the blower flange and the heat exchanger.

You also want the anti vibration gasket that goes between the blower flange and the heat exchanger.
So I take it that it doesn't come with the blower flange. The manual says there is a blower mounting plate and mounting grommets. I don't know what they look like or if I even have them.
 
So I take it that it doesn't come with the blower flange. The manual says there is a blower mounting plate and mounting grommets. I don't know what they look like or if I even have them.

No the blower comes with the motor, the housing, the squirrel cage, and the flange as a unit. They may or may not have an anti vibration/insulation gasket, depends upon who makes the blower and for whom it is made.

You want that gasket as it deadens noise.
 
  • Like
Reactions: Defiant
I think so because we had to go back and get other missing parts.

How many parts have gone missing? Get real familiar with that expanded diagram of your stove to confirm nothing else is missing. I hope you got an exceptional deal>>

Welcome to the forum:)
 
Status
Not open for further replies.