Ok pellets heads here's an odd ball
- Thread starter smwilliamson
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
sinnian
Minister of Fire
Defiant
Vermont Castings Geek
Hello,
Don 222222 will be all over this, prolly with his "Dry Molly"
Don 222222 will be all over this, prolly with his "Dry Molly"
looks like a tee with a baro damper as well? hm....quite the pipe reduction as well....what's the exhaust outlet size? Im thinking re-pipe or run away....
It's gotta all be done with 5". Don't have 18 to the Sheetrock above, 5" liner that was installed doesn't have an extension snout or an access to clean the vent from below via the clean out. Going to have to use stainless ridgid single wall from the boiler cause I cannot find a double wall 5" unless I go to class A, that becomes difficult to transition into a liner not mention expensive! Also going to needs a custom masonry adapter/ anchor, needs barometric damper....urg!? One thing for sure, it will be tricky.
- Status
Similar threads
