Yearly stove cleaning

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

GenghisJon

Member
Nov 9, 2009
74
Middletown, CT
Just curious do most people clean their own stoves before the season or get a professional do it?

I'd like to do it myself and save the money, I just don't know how hard it is/what it entails.

I'd love to hear what people have to say.
 
Yes, you can do it yourself! Best to clean after every ton of pellets you burn. Ash is everywhere, just not in your burn pot. You can use the search box at the top to pull up topics and you should read first, then ask any questions. Folks here are very helpful! Just cleaned my two stoves and now will paint the fireboxes just ahead of the 2013-14 burn season.
 
Just curious do most people clean their own stoves before the season or get a professional do it?

I'd like to do it myself and save the money, I just don't know how hard it is/what it entails.

I'd love to hear what people have to say.

What stove do you have? Add it to your sig line so we know? That will depend on how much is needed and how often. Some are easier than others. Some pretty hard, but most can be done by Johnny Homeowner.
 
Closest dealer for my Harmans is about 150 miles. They are easy to clean. Some stoves are a pain and you may need assistance in properly getting them clean. Good luck
 
Thanks, I have a QF Classic Bay 1200 Pellet Insert.

I'd like to think I can do it myself, whenever I hire somebody they seem to be finished in no time.

I keep the stove as clean as possible throughout the year, I'm just not sure if there is anything special a technician does that I can't do? Things with the motor and whatnot.
 
Whatever you do, if you need to replace the combustion/exhaust blower gaskets, just buy the material and cut it yourself. Thanks to the advice of helpful members on this forum I did just that and avoided having to pay $30+ dollars for a simple gasket. The fact that these pellet stove shops charge $30+ for such an item should be a criminal offense.
 
Whatever you do, if you need to replace the combustion/exhaust blower gaskets, just buy the material and cut it yourself. Thanks to the advice of helpful members on this forum I did just that and avoided having to pay $30+ dollars for a simple gasket. The fact that these pellet stove shops charge $30+ for such an item should be a criminal offense.

What did you buy for material and where?
 
I generally catch a nice Sunday afternoon, grab a beer or 12, turn a good football game on, unplug the P-38 spread out some newspapers (of course it has cooled down) grab a beer and start cleaning. I do need to get a good vacuum though. When I'm done I grab a beer and empty the ash pan, clean up the newspapers and grab a beer. Really it only takes me an hour or so depending on how much beer I drink.:p
 
I hear ya man . I don't work midnight shift , but close up at 2 on the job at 4:)
 
I clean my own stove. How else am I going to have any fun?
 
I clean my own - just did the deep clean this past Saturday. Make sure you reference your owner's manual and search on this site for your model. There might even be a video on YouTube (there's a video for everything on there).
 
  • Like
Reactions: herdfan2003
I have a Harman Accentra insert and I have done both. (Pay and DIY). I didn't pay anyone this year because I'm planning on going thru it myself. I'm going to wheel it outside and clean it really well. Go through and check/replace any gaskets. Then maybe a quick touch up with stove bright paint
 
wood stove coal stove /or insert

whats the best to buy

i was told to buy a coal stove to burn wood
thay say it would last longer
 
I cleaned my stove with an ash vac, then scraped the sides down. When I thought it couldn't be any cleaner, I took it out to the garage using a dolly, hooked up the leaf blower (In suction mode) to the exhaust/convection blower and turned it on. I swear the cloud of dust that came out of that unit was the size of an 18 wheeler. Only trouble I had was wishing the wind was blowing a little more so the neighbors didn't see the cloud! Sorry neighbors! I've used this method in the past and it works great. After the stove is as clean as can be, and the air draft I get after is like new. Just search the site for how to do the leaf blower trick. It can be done connected to the exhaust pipe also. Good Luck!
 
  • Like
Reactions: herdfan2003
Status
Not open for further replies.