Alderlea T6 door adjustment

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Cornelis

Member
Feb 6, 2013
109
Naugatuck,CT
Hi, I have trouble to find out how to adjust the door of my stove. I will include pictures maybe it makes sends to somebody. The picture is from the top of the door but there is a same set up on the bottom of the door. Thanks for the help
 

Attachments

  • P1010093.JPG
    P1010093.JPG
    192.9 KB · Views: 240
  • P1010094.JPG
    P1010094.JPG
    215.7 KB · Views: 225
What are we looking at in the first picture? I'm not seeing this on my stove. Have you contacted PE tech support and asked them for assistance?
 
yes I have and still waiting

What are we looking at in the first picture? I'm not seeing this on my stove. Have you contacted PE tech support and asked them for assistance?

In the far right corner that is the pin from the door but what the 2 in front of the pin are I have no clue
 
Curious I don't see that on our stove. Your stove is one of the earliest off the line. I wonder if the allen screws are an adjustment? Are we looking at the bottom hinge pin here?
 
Curious I don't see that on our stove. Your stove is one of the earliest off the line. I wonder if the allen screws are an adjustment? Are we looking at the bottom hinge pin here?

No..That is the top but it is the same as on the bottom. I talked to madison and he said he had hinges and his stove is from 2006 mine is 2007
 
Are you sure you have the dates correct? Madison got his stove in Sept 2008. I got mine in March 2008, though it was a showroom model from the Chimneysweep, so a fall 2007 model. I'm thinking you may have an early 2007 model and possibly one of the first off the line. The hinge pin definitely doesn't match mine. Those allen screws are not present at the top or bottom.

https://www.hearth.com/talk/threads/t6-dvl-classa-thimball-install-question.20165/
 
Are you sure you have the dates correct? Madison got his stove in Sept 2008. I got mine in March 2008, though it was a showroom model from the Chimneysweep, so a fall 2007 model. I'm thinking you may have an early 2007 model and possibly one of the first off the line. The hinge pin definitely doesn't match mine. Those allen screws are not present at the top or bottom.

https://www.hearth.com/talk/threads/t6-dvl-classa-thimball-install-question.20165/

Yah, Mine is 2007
 
This is what our hinge base looks like.
alderlea hinge.jpg
 
This is what our hinge base looks like.
View attachment 112311

That looks different. I think I found out how to adjust the door. I took of the right leg to get to the bottom allen screws loosen the top and bottom allen screws. I can move the door in place maybe not perfect but better than it was before but to be sure I have to wait till my girlfriend comes home I need a extra pair of hands. Somebody needs to hold the door while the other tighten the allen screws.
 
That's what those screws looked like they were for. Good to hear you are making progress.
 
Status
Not open for further replies.