Good day all; its my 1st post so please be easy on me. We have a Castille insert and have a remote control thermostat for it. Now the problem is for the past 2 days the stove has come on and dropped pellets into burn pot and exhaust fan is running HOWEVER the remote is turned off...please help I'm worried their may be a power issue occurring to said circuit the insert is on. Thanks for your time...
quadra fire castille insert issue
- Thread starter Dave Johnston
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
jtakeman
Minister of Fire
Hmmm, Could be picking up another frequency? Try keeping the remote on with a very low temp setting so the stove doesn't call for heat.
Change all the batteries in the remote while your at it. JIC
Change all the batteries in the remote while your at it. JIC
smwilliamson
The Stove Guy
There is a one in 4,000,000 chance a nearby garage door controller is on the same frequency. Change the batteries and reset the receiver.
Fish On
Feeling the Heat
I had a lot of issues with my quad remote. Went with a sky tech and never had any. Stupid question but your remote is not sitting in the sun sometimes direct sunlight can shut down calling for heat.
WoodPorn
Minister of Fire
smwilliamson
The Stove Guy
peirhead
Feeling the Heat
Bypass the wireless stuff and try a regular thermostat to make sure there is no issues with the stove...then go pack to troubleshooting the wireless system....it could be the remote, or the receiver, or as mentioned interference from some other system. I just run a wired programmable thermostat off mine and it works great....If you can avoid wireless all the better.
- Status
Similar threads
