How to make the combustion blower turn on?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

shtrdave

Feeling the Heat
Feb 13, 2012
396
SW PA
When the dealer installed mine he said he needs to replace the combustion blower because it made some noise, it did but mostly at higher rpm. I used it last winter without issue, and took it out the other week and they gave me a new one. I put it back in and would like to try it out, but while I had enough intelligence to change it I can't figure out how to turn it on without lighting the stove.

I also found that fines box hidden behind the control panel and cleaned it out also/

I have a P43 Harman
 
With the cold front coming across the country you won't have to wait long to fire up the stove. The ESP and control board control the fan coming on. Don't worry:)
 
Put the stove in "Test" mode ;)

ETA- Ohhh..combustion blower. Just turn the stove on but dont light it. Flip the toggle to "Manual". The 43 should only have 1 speed on that blower. Did you mean distribution blower? If so see line 1.
 
Last edited:
Yes I got my blowers messed up, I replace the distribution blower.
 
Status
Not open for further replies.