Quadrafire 1200i won't start up

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

arking1

Member
May 29, 2008
19
Long Island, NY
I originally posted this in a different thread but I think I have more of a problem then I originally thought. I was having trouble with the convection motor not starting up. So I was going to switch Snap Disk 1 out with an adjustable snap disk. But now my stove doesnt even start up. I put the original snap disk 1 back in to eliminate that variable for now. The red light comes on and the blue light blinks when I first plug in the stove. But the stove never does anything else. I jumped out snap disk 1 and the convection motor will start and keep running, but the stove still doesn't start. I am not sure what to try next. Any guidance would be greatly appreciated.

Thanks
Ryan
 
I presume u mean exhaust motor if it doesn't start?
 
does your combustion blower come on?
 
if you have the unit on a themostat, make sure you have the temp set high enough to tell th e machine to come on. I dont actually do work on the quad, so I dont have a lot of input. sorry.
 
Status
Not open for further replies.