25 pdv won't stay lit with pellet feed rate of less than 3?

Have you lowered the "low burn air" ? if you lower the feed the air rate must go down also.

BrotherBart said:

Paging Mr. Holton. Call in the lobby for Mike Holton.

Click to expand...

What he said

check the LFF setting (Low Fuel Feed) if its set too low (should not be right outta the box but) if its set too low it would starve the stove in ranges 1 and 2.

the default setting for this is 6,to check it, press the button and look in the blower speed for the setting, if its lower than 6 quickly raise the number by pressing the blower speed up button (note this has to happen within 5 seconds of hitting the LFF button, if not quick enough , just press the LFF again and resume.

if this isn't the issue i ask you to PM me a daytime phone number and i will have a technician contact you to work with you to solve the issue, shouldn't be too hard to figure out.

BTW the complete settings would be (from left to right) LFF 6 LBA 4 AOT 1, verify these settings are correct please as if they are not it will cause issues such as you are having

nick123 said:

Just checked the settings, they show 1:4:1

Click to expand...

yep, that'll do it, raise that LFF up to 6 then when you turn the stove down to 1 on the heat range she'll stay lit for ya

easy peasy