What type of wood is this

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Tulip Poplar. I have a half load burning in the 30-NC as I type.
 
I vote poplar based on photo in post #3. What part of Delaware? I am about 20 minutes from Newark in SEPA. Welcome to the forum.

Unless you are flying a plane there is no part of PA 20 minutes from newark.
 
Unfortunately I see poplar now too. Don't waste your time with it. Get some good wood.
 
Unfortunately I see poplar now too. Don't waste your time with it. Get some good wood.
Well that's a bummer. It's so close to home. Last pic just be be sure.
 

Attachments

  • image.jpg
    image.jpg
    383.4 KB · Views: 149
Well that's a bummer. It's so close to home. Last pic just be be sure.
That's poplar for sure. I wouldn't write it off entirely, it will still burn and give you heat. I just would just work on something else more desirable if it was available.
 
gzecc - if you had said Newark, NJ you'd be right. However Newark DE, is 20 minutes away.

Sully, welcome to the forum neighbor.
 
Wait a minute - where did all that heart wood come from? The other pics didn't display that. If this is the same stuff as originally posted I am pretty sure the other folks are correct with popular. I have never seen ash with the heartwood that pronounced. It is usually almost "pure" and that is not what you have.
 
gzecc - if you had said Newark, NJ you'd be right. However Newark DE, is 20 minutes away.

Sully, welcome to the forum neighbor.

I apologize. I was thinking Newark, because I just picked someone up from the airport. Sorry.
 
Sully your last post confirms Tulip beyond a doubt but I would take the wood and process it. If you have your hands on it now...just finish what you started. It will be a great "shoulder season" wood as they say here.
But I would work your way thru it rather quickly so you can keep the momentum going. Passing over it just means process it quickly and efficiently and move to the next log.
Think Beaver.
 
Those green streaks are classic Tulip. I think Tulip is a rather dense wood. I tried using some rather wide planks for some sign carving and I was amazed. It doesnt match the lower BTU rating its been assigned. But apple is in the middle range too and I would give that wood a higher rating as well.
 
Green Ash has that slight light green hue to it. It seasons to a nice light tan.
Whatever it is you have a lot of it:) Get it split and stacked quick!
 
Those green streaks are classic Tulip......but I would take the wood and process it
Neighbor has some split and stacked that he is passing around. I'm going to split some to kindling size and see if it is good for hot, fast starts.
 
Poplar for sure-Ash has more of a round, defined "pinhole" than the one that you pictured-there's no mistaking it. I knew it was Poplar as soon as I saw the different "shades" of color in the pictures you posted earlier. Ash isn't multi-colored. By the way, you posted REALLY good pictures which makes it much easier to identify!
 
  • Like
Reactions: BrotherBart
I burn quite a bit of cotton wood which is along the same lines as poplar. I'm not a wood snob. It's light, it dries fast, and it really reduces the amount of hardwood you burn in the shoulder seasons, and its great for stoking coals in the morning in 2 seconds. If its easy to nab, you should take it....don't hate it because it definitely burns.
 
You can see the green heartwood in the very 1st pic it's tulip poplar for sure. Tulip is one of the better burning poplars wright it off. It is light and low on the BTU'S but is good for shoulder season and mixing in with other woods in the daytime.
 
Status
Not open for further replies.