xtrordinair
Member
thats a error code related to the flame height control solenoid .i would say that gas valve is pretty much a paper weight at this point.sorry for the bad news but unless your in love with that unit junk it and dont look back.
Another VC Radiance problem
- Thread starter erikb45
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
xtrordinair
Member
if you want to try one more thing ,i have seen these get internally stuck ,get the pilot lit and burning for several minutes to insure theres enough MV built up, then while trying to make the burner light with the remote tap around on the valve in several spots with a cresent wrench or similar tool .dont be afraid to tap on it with light force it wont hurt it at all.
xtrordinair
Member
the valve has been discontinued,i thought we discussed this allready.it will require a complete valve conversion upgrade at a cost of about 750+ dollars.
- Status
