I have the winslow pi40. I turn it on and all the light are on as they should be. I hit the start button and within 3 seconds the red light comes on and it shuts everything down. Any ideas?
please help...winslow pi40
- Thread starter jrsaluski@gmail. com
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
EZsteve
Member
Does the light stay red or blink red? Is there any other light on? If the light comes on and stays on its the igniter. Either bad or blown fuse. that is what the manual says.
Steve with Lennox, I have a PI40 that the Auger Motor sounds like it is starting to get weak and makes a severe grinding noise from the Auger Tube. Removed all Pellets, vacuumed out the tube for fines as best I could, took out the 7/16 bolts from the Auger tube and motor mount, spun the auger manually by rotating the motor, vacuumed more, reassembled, and still the same grinding. Just started yesterday. Any ideas? Looking into replacing the motor as it seems pretty old.
Also, looking for the Tech / service manual as the User / Install guide isn't very helpful for servicing.
Thanks,
Brian
Also, looking for the Tech / service manual as the User / Install guide isn't very helpful for servicing.
Thanks,
Brian
- Status