Harmon problems

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Need to check power flow. Power at outlet at end of plug cord(pull out of back of stove) power at end of harness for the combustion blower. Are we getting power delivered to these individual motors?
 
  • Like
Reactions: Defiant
Harman Lover 007 said:
The ESP is a very sensitive electronic component. One should never recommend using a drill mounted wire brush to clean it....
Click to expand...
OR a vent brush. Could bend it.
 
Status
Not open for further replies.

Similar threads

N
Harmon PC45 troubleshooting
Replies
6
Views
336
The Pellet Mill - Pellet and Multifuel Stoves
Northwoodneil
Northwoodneil
M
Harmon Advance board with no dip switches
Replies
7
Views
962
The Pellet Mill - Pellet and Multifuel Stoves
Northwoodneil
Northwoodneil
M
1997 Harman pp38+ auger issue
Replies
1
Views
328
The Pellet Mill - Pellet and Multifuel Stoves
johneh
johneh
R
Harman P68 Ignition Problems
Replies
15
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
NS P-68
NS P-68
Ranckie
Harmon Insert Not Burning Correctly
Replies
2
Views
562
The Pellet Mill - Pellet and Multifuel Stoves
Ranckie
Ranckie
Top Bottom
Back