I have an accentra insert that I cleaned today. When I went to restart it, the combustion blower spun for a second and then started to hum without turning like it was blocked. I pulled the unit out and can see the fan blades which are moving freely. I fired it up for a second and they moved and then the blower started to hum again and the stopped moving. Any thoughts on fixing this?
Help - Harman Accentra Insert combustion blower
- Thread starter Steve T
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Well I'm stumped too but then I'm no expert. The next thing I would be inclined to try is to hook up the combustion blower to a set of 120V test leads to see if it operates independent of the stove electronics.
Hopefully, one of the guru's will jump in and offer better advice.
Hopefully, one of the guru's will jump in and offer better advice.
- Status
Similar threads
