I took my ash pan out today to dump ashes and the gasket came with it. I can't find any youtube vids showing how to put it back into the groove. Is there an adhesive to hold it in the groove? If so, what type?
Mt Vernon AE ash pan gasket
- Thread starter jimfrompa
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
RockyMtnHigh
Feeling the Heat
You could use gasket cement or even high temp silicone. High temp silicone can be found at automotive parts stores also known as RTV
BigJohnfromCT
Feeling the Heat
Jim, from your signature area, it seems as though you just got your stove in 2013. It should still be under warranty if you bought it new. I'd call the dealer and ask him what he can do for you or what you shold do. Be careful of using glues, silicones or adhesives as you might void the warranty. My two cents.
John
John
Good point about the warranty. However, frigid cold weather in Pennsylvania was coming so I bought the RTV silicon adhesive and managed to get it back in place. The last time I called the dealer to come out, it took 10 days - didn't want to wait.
- Status
Similar threads
