p38 has developed auger squeal. i am looking for a step by step instruction on the removal of the auger.
thank you in advance for any help.
thank you in advance for any help.
harman p38 auger squeal
- Thread starter CelciusMaximus
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Hoot23
Minister of Fire
Shut the stove down, empty the hopper, turn it on test mode to get all the pellets out of the tube. Unhook the two connectors, take the fines cover off and rotate the slide plate arm out of the way. Loosen the bolt on the shaft and slide off auger motor. Then after that it's just two bolts on the auger plate and your good.
mepellet
Minister of Fire
Hoot23
Minister of Fire
No problem. I've taken my auger out a few times because of the squeal. You can take the slide plate out and clean it also. Happy burning.
tonyd
Feeling the Heat
When you pull it ,try to see where its making contact with the auger tube. Clean it up with a file. Its moving pellets so the fit doesn't need to be so tight.
- Status
Similar threads
