I have tried to follow the manual to fix this, but it didn't work. I replace the gasket around the glass and it still doesn't work, keeps flashing #1&2 for a vacuum error. What else can I do?
Vacuum error in USSc model #5660
- Thread starter EMF
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
pell it
Feeling the Heat
Have checked the door gaskets and ashpan gasket with a dollar bill?
If they pass than check the tube going to the vacuum switch is not clogged or cracked.
If tube is good, put a TEST jumper between the two wires connected to the vacuum switch and see if the stove will start and run. DO NOT LEAVE THE JUMPER IN PLACE BEYOND THE TEST RUN!! The vacuum switch is a very important safety feature.
If they pass than check the tube going to the vacuum switch is not clogged or cracked.
If tube is good, put a TEST jumper between the two wires connected to the vacuum switch and see if the stove will start and run. DO NOT LEAVE THE JUMPER IN PLACE BEYOND THE TEST RUN!! The vacuum switch is a very important safety feature.
- Status
Similar threads
