Possible bigger convection on 25pdvc

Sorry to ask a stupid question. But your saying increase the blower speed button? I was under the impression that the heat range button and the blower speed button needs to be the same number. 1-1, 2-2, etc. up to 9-9. Is this correct? Also, if I do increase these buttons higher, will it consume more pellets faster? Or is that controlled by the lower "low fuel feed button" on the bottom 3 buttons?

They don't have to be the same, though I would make sure the blower was always the same or higher than the heat setting. Like I said, my blower setting is on 9 no matter the heat setting.

kyas said:

if I do increase these buttons higher, will it consume more pellets faster?

Click to expand...

There should be no noticeable difference. In theory it will consume less pellets because the stove will be slightly more efficient with the higher convection blower setting. The only down side to higher blower setting is more noise.
The first upper button controls pellet feed rate. Increasing that will increase pellet consumption and increase heat output.

Thank you very much guys I will try this tonight. Here in Mass it will be very cold tonight!