RSF Opel2 Fan

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

sarwilky

Member
Jan 27, 2014
8
Maine
Hello. I have an RSF Opel 2, not connected to central heating, but it has the "auto" fan that turns on when the stove hits a certain temperature. When i first bought it, the fan turned on within 30 minutes. It now takes 2-3 hours… nothing else is different (that i am aware of?). Is there a way to set the sensitivity of the fan? Is there some other problem that could be affecting this?
Any feedback would be much appreciated!
Sarah
 
Last edited by a moderator:
The thermodisc (sensor) for the fan is underneath, near the right side of the ash pan if you have one and near the electrical junction box, (beside or behind) usually mounted with a magnet or a spring clip and should be near the bottom of the firebox floor. The closer it is to the metal (firebox floor) the sooner it will come on. When installed I think it should be set approx 1/4 inch from metal. What ever distance you have it should be less to have it come on sooner.

Good luck
Clair
 
  • Like
Reactions: begreen
Status
Not open for further replies.