Harman xxv only combustion blower turning on

I have a harman xxv that when I turn on only the combustion blower is turning on not the auger, igniter etc. this began after I cleaned the ash pot etc and restarted it yesterday. The stove lit but then when back out and this is now the case since. When I turn it to test mode everything appears to work and the sensor light is not blinking. I cleaned the exhaust fan blades, ESP sensor and exhaust pipe but no change in the problem.
Any suggestions would be appreciated.

DAKSY said:

How old is your XXV?

Click to expand...

3 years old

Bioburner said:

Sounds like the vacuum switch is not being be activated to start the auger. Check the vacuum tube and the stoves port for blockage, possibly to good of a job of cleaning Have you done a door gasket check wit dollar bill lately?

Click to expand...

Can you expend on the stoves port?

Bioburner said:

Stove side of the hose from the vacuum switch that should be a barbed fitting that the hose slips onto.

Click to expand...

I just checked the hose I can blow through it back towards the stove do I need to further check anything related to it?

I have not replaced the door gasket yet it still appears to be in good shape.